field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: The incumbent will oversee field operations for T&amp;D (Transmission and Distribution). The duties will include but not be limited to supervising and inspecting maintenance, repair and installation work performed by contractor and Veolia crews. Maintaining a safe environment for all employees and customers. Primary Duties/Responsibilities: <ul><li>Coordinate and schedule a variety of maintenance, installation, and repair projects.</li><li>Allocate and assign work crews to specific jobs based on job requirements and manpower availability.</li><li>Supervise and inspect maintenance, repair, and installation work to be completed in the assigned service area.</li><li>Follow the MUTCD for safe traffic designs for road closers.</li><li>Perform documented safety inspections of system maintenance crews and inspectors during course of daily field inspections.</li><li>Oversee the billing and field operations of mark-out contractor.</li><li>Update work force management software of field ready work, prior to assigning the activity.</li><li>Respond to complaints or problems received from customers (residential, commercial, and municipal) by conducting physical site inspections.</li><li>Check periodically on work in progress of private contractors to verify the quality of work as well as the statements they submit as to the amount of material and labor used.</li><li>Investigate site for planned projects to determine necessary safety precautions, special tools, and equipment, in addition to other special project requirements.</li><li>Participate in developing and implementing the department's operational scheduling and standard operating procedures.</li><li>Monitor, maintain and develop KPIs.</li><li>Must be able to respond to emergency calls and work extended hours as needed (the incumbent must be a member of the emergency callout rotation team) with a 45-minute response time.</li><li>Commitment to health, safety, and protection of the environment:</li><li>The incumbent supports Veolia's commitment to safety by complying with the programs regarding health, safety, and protection of the environment. The incumbent demonstrates safe work practices, takes part in safety meetings, and advises the superintendent of any non-conforming conditions.</li><li>The incumbent must be in possession of a valid driver's license.</li><li>All supervisory staff are expected to monitor emails and texts for emergency situations which may arise, and communicate with the Manager, Corporate Communications, BPU, DEP, Operations, and other T&amp;D management staff.</li><li>Complies with all organization safety procedures.</li><li>Sets the tone for safety and housekeeping.</li><li>Lead by example.</li><li>Accountable for personnel issues.</li><li>Performance.</li><li>Corrective Action.</li><li>Development.</li><li>Perform other projects / tasks/ duties as assigned.</li></ul> Qualifications Education/Experience/Background: <ul><li>A Bachelor's degree in management, engineering, or science is preferred.</li><li>3-5 years of supervisory experience.</li></ul> Knowledge/Skills/Abilities: <ul><li>Must be able to read complex reports and engineering drawings. Write detailed reports and prepare presentations. Analyze complex operational and engineering challenges and resolve same. Learn new technological advances in distribution technique and equipment.</li><li>Ability to learn how a water distribution network operates.</li><li>Have strong managerial and interpersonal skills.</li><li>Adequate computer skills and the ability to work within an office environment.</li><li>Able to utilize Microsoft Office and Google.</li><li>Able to learn how to utilize a workforce management software.</li><li>Effective supervisory techniques.</li><li>Strong knowledge in methods, practices, procedures, materials, and equipment associated with the construction, maintenance, and repair of water distribution systems.</li><li>Ability to effectively supervise skilled and unskilled employees.</li><li>Ability to accurately read and interpret engineering plans and drawings.</li><li>Ability to work harmoniously and tactfully with other departments and the public.</li><li>Ability to keep accurate records and submit accurate reports.</li><li>Ability to determine work priorities and schedule, organize, assign, and coordinate the work of crews and individuals and communicate this to the Planning department.</li><li>Assist in employee selection, training, supervision, and evaluation.</li><li>Ability to communicate effectively both orally and in writing.</li><li>Ability to handle multiple deadlines and multiple projects.</li><li>Ability to inspect work in progress and upon completion.</li><li>Record keeping and report writing techniques.<ul><li>Understand and perform safety practices and procedures.</li><li>Applicable health and safety regulations as they relate to area assigned.</li></ul></li><li>Must be able to respond to emergency calls and work extended hours as needed.</li><li>Able to understand basic math and hydraulics.</li></ul> Required Certification/Licenses/Training: <ul><li>Must have or be able to obtain a NJDEP Water Distribution Class Licenses.</li><li>NJDEP W-1 Distribution License is preferred.</li><li>Ability to attain CDL.</li></ul> Physical Requirements: <ul><li>Walking on uneven terrain; climbing hills and stairs; moderate lifting up to 25 pounds; sit for long periods at a time.</li><li>Must be able to see clearly, hear through listening devices such as an aqua phone for leaks and hear warning devices and alarms.</li><li>Must be able to speak to give direction and converse with other officials.</li><li>Must be able to smell for dangerous conditions such as sewer gases and chlorine.</li></ul> Additional Information Pay Range $100000 to $105000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Systems Maintenance Supervisor

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: The Supervisor, System Maintenance and Planning (After Hours) will lead the after-hours activities of the construction and distribution departments as well as the Central Service Bureau (CSB) . This will include management of operation, maintenance and repair of distribution systems facilities, and related investigative activities on a planned and emergency basis. The Supervisor will approve deployment of personnel as required to execute planned work and maintain continuity of service for customers on an emergency basis. The Supervisor will coordinate any changes in planned activities for the next business day and ensure a seamless transition of oversight is achieved with the business hours team. The Supervisor will ensure all clerical, workforce management and emergency functions are carried out in accordance with acceptable procedures. The Supervisor will provide direction and communication to CSB staff as required to ensure that customer inquiries are handled in a timely, efficient and professional manner. The base working hours for this position will be 10:30 PM (Sunday) - 7:00 AM (Friday). Primary Duties/Responsibilities: <ul><li> Departmental Coordination and Supervision <ul><li>Coordinate after hours planned and emergency activities of system maintenance departments: Construction, Distribution, and CSB.</li><li>Supervise operations, including the installation, maintenance, repair, and improvement of system facilities (ex. mains, services, hydrants, valves).</li><li>Manage investigative work related to customer inquiries.</li><li>Ensure operational transition of Departmental oversight to and from the business hours team is seamless.</li><li>Coordinate schedule changes for the next business day that may be required as a result of after hour activities and staffing changes.</li><li>Confirm administrative completeness for all activities planned for the next business day and coordinate as required with the business hours team.</li></ul></li><li> Field Visits and Safety <ul><li>Conduct regular construction and distribution work site field visits to ensure teams are adequately resourced to meet customer needs in a safe and efficient manner.</li><li>Initiate action to eliminate safety hazards to employees, customers, and the public.</li><li>Ensure compliance with company policies, industry standards and regulatory requirements such as water quality regulations and safety regulations.</li><li>Prepare field reports documenting progress and identifying opportunities for improvement in prioritization, planning, scheduling, execution, and communication.</li></ul></li><li> Planning and Procedures <ul><li>Ensure execution of after-hours work plans developed with the System Maintenance team for the Construction and Distribution Departments.</li><li>Prioritize, plan, schedule and oversee emergent work as required to maintain continuity of service for customers.</li><li>Staffing and Training Program Support.</li><li>Review staffing plans for activities planned the next business day and coordinate as required with the business hours team.</li><li>Review work and safety training progress for the Departments and advise on projections to ensure the annual requirements and targets are met.</li></ul></li><li> Customer and Stakeholder Relations <ul><li>Working with the Communications and External Affairs teams, coordinate after hours company activities with external agencies and stakeholders as required to resolve mutual concerns.</li><li>Make on-the-spot decisions regarding customer disputes or complaints to maintain good community relations.</li></ul></li></ul> Work Environment: <ul><li>This position will be approximately 50% in the office and 50% in the field in a roadside construction environment.</li><li>The base working hours for this position will be 10:30 PM (Sunday) - 7:00 AM (Friday).</li></ul> Qualifications Education/Experience/Background: <ul><li>High School Diploma/GED is required.</li><li>Experience in water distribution, construction is preferred.</li><li>Minimum of 2 years supervisory experience in underground utility installation and repair or management and operation of public water supply distribution systems.</li></ul> Knowledge/Skills/Abilities: <ul><li>Ability to cope with emergency situations on a 24/7 basis in a dynamic and fast paced customer service-oriented business.</li><li>Ability to foster positive labor relations in a union shop environment.</li><li>Ability to read and interpret engineering drawings of distribution networks a plus.</li><li>Understanding of hydraulic principles related to piping networks a plus.</li></ul> Required Certification/Licenses/Training: <ul><li>Ability to pursue a NJ DEP W-1 operator's license within 1 year is preferred.</li></ul> Additional Information Pay Range $115000 to $120000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

System Maintenance and Planning Supervisor (After-Hours)

Working with Us Challenging. Meaningful. Life-changing. Those aren’t words that are usually associated with a job. But working at Bristol Myers Squibb is anything but usual. Here, uniquely interesting work happens every day, in every department. From optimizing a production line to the latest breakthroughs in cell therapy, this is work that transforms the lives of patients, and the careers of those who do it. You’ll get the chance to grow and thrive through opportunities uncommon in scale and scope, alongside high-achieving teams. Take your career farther than you thought possible.Bristol Myers Squibb recognizes the importance of balance and flexibility in our work environment. We offer a wide variety of competitive benefits, services and programs that provide our employees with the resources to pursue their goals, both at work and in their personal lives. Read more: careers.bms.com/working-with-us.At Bristol Myers Squibb we are reimagining the future of cell therapy. With our bold ambition, backed by a best-in-the-industry team and long-term commitment, we are leading the way to unlock the full promise of cell therapy as we strive to put more patients on the path to a cure. If you are ready to challenge yourself, accelerate your career, and give new hope to patients, there’s no better place than here at BMS with our Cell Therapy team.The Metrologist is responsible for supporting the functionality of the metrology group. This includes execution, review and approval of calibration work in the field. The Metrologist ensures that all the instrumentation and calibrations standards are properly maintained. The Metrologist will assist in developing work templates and calibration methods per best industry practices and standards.Shift Available: <ul><li>Monday - Friday, Onsite Day Shift, 8 a.m. - 5 p.m.</li></ul>Responsibilities: <ul><li>The overall role is to assist in maintaining the integrity of the metrology program and ensure compliance to the BMS calibration program.</li><li>Perform instrumentation criticality assessments.</li><li>Respond to Customer requests in a professional and timely manner.</li><li>Respond in accordance with cGMP policies and procedures.</li><li>Perform routine calibrations and controls troubleshooting.</li><li>Assist in troubleshooting and emergency situations.</li><li>Complete necessary paperwork, i.e., Logbooks, Work Orders, Calibration Documentation in accordance with cGMP good documentation practices.</li><li>Use various testing devices and standards related to calibration services.</li><li>Demonstrate skill and care in the use of tools and materials used within calibration trades.</li><li>Perform all work in accordance with established safety procedures.</li><li>Train colleagues as necessary.</li><li>Work with internal and external partners. Provide cGMP oversight of external vendors to ensure they are operating within the cGMP policies and procedures of the area.</li></ul>Knowledge &amp; Skills: <ul><li>In-depth knowledge in all discipline of International System of Units (SI).</li><li>Inspect, maintain, test, troubleshoot, adjust, repair and/or replace. instrumentations and equipment in the CMMS inventory.</li><li>Must be competent in working in the electronic CMMS to track scheduled work and execute calibrations electronically.</li><li>Must be competent in working with building monitoring systems for calibrations.</li><li>Must be proficient with Digital Controls, and/or pneumatics, plus other functional components of differing systems.</li><li>Must be capable to provide diagnostic feedback to support deviations, investigations, and root cause analysis and corrective actions.</li><li>Must be able to provide feedback on field calibrations to support continuous improvement of the calibration program.</li><li>Coordinate routine and on-demand calibrations with the Business Area Owners and the Facility Planners.</li><li>Review all executed calibrations within the CMMS or paper-based forms.</li><li>Identify OOT and escalate notification according to BMS policies.</li><li>Initiates deviations as they relate to calibration OOT or nonconformance conditions.</li><li>Assists in managing calibration standards required to support BMS’s Calibration Program.</li><li>Conduct instrument evaluations and complete Instrument Data Forms to input new or revise instrumentation.</li><li>Assist in creating new calibration procedures and providing input on existing for periodic reviews.</li><li>Provides support and direction to outside contracted calibration and controls service providers.</li><li>Provide oversight of critical spare parts and inventory as they relate to instrumentation and controls.</li><li>Promotes and provides excellent customer service and support.</li><li>Regularly reviews, prioritizes, coordinates and promptly responds to calibration work orders and service requests.</li><li>Maintains a positive relationship with all the members of the Facilities department and our site customers while promoting a positive team environment.</li><li>Promotes and maintains compliance with corporate, safety, security and regulatory policies.</li><li>Maintains all assigned Corporate, Facilities, GMP and EHS training as required.</li><li>Prioritize BMS goals and culture.</li></ul>Basic Requirements:<ul><li>Associate’s degree in engineering or physics or a technical certification in instrumentation.&nbsp;</li><li>Minimum of 5 years in Pharmaceutical Industry preferred or in a regulated industry.</li><li>Minimum of 5 years in a calibration technician or similar technical role.&nbsp;</li><li>Must have experience with temperature, pressure, all gasses, HVAC.</li><li>Must have strong experience with calibration reports and calibration certificates.</li></ul>Preferred Requirements:<ul><li>6 Sigma experience (White or Yellow belt).</li><li>Calibration certifications such as ISA.</li></ul>The starting compensation for this job is a range from $96,350 to $116,800 plus incentive cash and stock&nbsp;opportunities (based on eligibility).&nbsp;The starting pay rate takes into account characteristics of the job, such as required skills and where the job is performed.&nbsp; Final, individual compensation will be decided based on demonstrated experience.&nbsp;Eligibility for specific benefits listed on our careers site may vary based on the job and location. For more on benefits, please visit our BMS Careers Site.Benefit offerings are subject to the terms and conditions of the applicable plans then in effect and may include the following: Medical,&nbsp;pharmacy, dental and vision care. Wellbeing support such as the BMS Living Life Better program and employee assistance programs (EAP).&nbsp;Financial well-being resources and a 401(K). Financial protection benefits such as short- and long-term disability, life insurance, supplemental&nbsp;health insurance, business travel protection and survivor support. Work-life programs include paid national holidays and optional holidays,&nbsp;Global Shutdown days between Christmas and New Year’s holiday, up to 120 hours of paid vacation, up to two (2) paid days to volunteer, sick time off, and summer hours flexibility. Parental, caregiver, bereavement, and military leave. Family care services such as adoption and surrogacy reimbursement, fertility/infertility benefits, support for traveling mothers, and child, elder and pet care resources. Other perks like&nbsp;tuition reimbursement and a recognition program.BMSCART, #LI-OnsiteGPS_2025If you come across a role that intrigues you but doesn’t perfectly line up with your resume, we encourage you to apply anyway. You could be one step away from work that will transform your life and career.Uniquely Interesting Work, Life-changing Careers With a single vision as inspiring as “Transforming patients’ lives through science™ ”, every BMS employee plays an integral role in work that goes far beyond ordinary. Each of us is empowered to apply our individual talents and unique perspectives in a supportive culture, promoting global participation in clinical trials, while our shared values of passion, innovation, urgency, accountability, inclusion and integrity bring out the highest potential of each of our colleagues.On-site ProtocolBMS has an occupancy structure that determines where an employee is required to conduct their work. This structure includes site-essential, site-by-design, field-based and remote-by-design jobs. The occupancy type that you are assigned is determined by the nature and responsibilities of your role:Site-essential roles require 100% of shifts onsite at your assigned facility. Site-by-design roles may be eligible for a hybrid work model with at least 50% onsite at your assigned facility. For these roles, onsite presence is considered an essential job function and is critical to collaboration, innovation, productivity, and a positive Company culture. For field-based and remote-by-design roles the ability to physically travel to visit customers, patients or business partners and to attend meetings on behalf of BMS as directed is an essential job function.BMS is dedicated to ensuring that people with disabilities can excel through a transparent recruitment process, reasonable workplace accommodations/adjustments and ongoing support in their roles. Applicants can request a reasonable workplace accommodation/adjustment prior to accepting a job offer. If you require reasonable accommodations/adjustments in completing this application, or in any part of the recruitment process, direct your inquiries to <a href="mailto:adastaffingsupport@bms.com" target="_blank">adastaffingsupport@bms.com</a>. Visit careers.bms.com/eeo-accessibility to access our complete Equal Employment Opportunity statement.BMS cares about your well-being and the well-being of our staff, customers, patients, and communities. As a result, the Company strongly recommends that all employees be fully vaccinated for Covid-19 and keep up to date with Covid-19 boosters.BMS will consider for employment qualified applicants with arrest and conviction records, pursuant to applicable laws in your area.If you live in or expect to work from Los Angeles County if hired for this position, please visit this page for important additional information:&nbsp;<a href="https://careers.bms.com/california-residents/" target="_blank">https://careers.bms.com/california-residents/</a>Any data processed in connection with role applications will be treated in accordance with applicable data privacy policies and regulations.

Bristol Myers Squibb

GMP Facilities Metrologist

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Under the direction of the Senior Manager-Production Support, NJ Operations, The Supervisor-General Maintenance is responsible for overseeing all maintenance activities for buildings and grounds in the Veolia New Jersey service territory. Primary Duties/Responsibilities: <ul><li> Overall Objective : To ensure the proper maintenance and operational readiness of all Veolia facilities, vehicles, and equipment, and to provide resource support to other departments as necessary.</li><li> Work Assignment Delegation : To assign and manage tasks to maintenance personnel, ensuring the availability of required resources and materials for successful task completion.</li><li> Safety Compliance : To maintain comprehensive knowledge of and adherence to all applicable safety regulations and protocols relevant to industrial site operations.</li><li> Operational Contingency Planning : To effectively address operational disruptions, including inclement weather events, equipment failures, and personnel absences, through strategic resource reallocation and task prioritization.</li><li> Contractor Oversight : To supervise and evaluate the performance of external contractors, ensuring compliance with contractual obligations and quality standards.</li><li> Comprehensive Maintenance Oversight : To manage and oversee the maintenance and repair of diverse systems and infrastructure, including water systems and building facilities.</li><li> Treatment Program Management : To administer and direct the maintenance of filtration and PFAS treatment systems.</li><li> Snow Removal Coordination : To organize and execute snow removal operations and provide support to the Watershed Department during winter conditions.</li><li> HVAC System Administration : To oversee and manage the maintenance of HVAC systems across all company locations.</li><li> Emergency Response Capability : To be available and responsive to emergency situations at all times, including after-hours incidents.</li><li> Reservoir Support Services : To provide assistance and support for reservoir treatment operations.</li><li> Interagency Liaison : To serve as a liaison between the company and external agencies, as well as other internal departments.</li><li> Environmental Sustainability Support : To actively support recycling and environmental sustainability initiatives.</li><li> Contractor Management : To manage relationships with major contractors, conduct site inspections, and coordinate equipment rentals as needed.</li><li> Equipment Provision : To provide equipment, including vehicles and pumps, to other departments as required.</li><li> Engineering Support : To assist the Engineering Department with land surveying and related activities.</li><li> Staffing Augmentation : To provide additional staffing support to other departments during peak periods or as necessary.</li><li> Employee Training and Development : To deliver training to maintenance staff on job procedures and safety protocols.</li><li> Regulatory Compliance : To ensure adherence to the backflow and cross-connection control program requirements.</li><li> On-Call Availability : To be readily available for on-call duty to address maintenance issues promptly.</li><li> Emergency Response Team Participation : To serve as a member of the Veolia NJ Emergency Response Team.</li><li> Spill Response Management : To manage and coordinate the response to oil and waste spills.</li></ul> Qualifications Education/Experience/Background: <ul><li>High School Diploma/GED is required.</li><li>Relevant trade experience and training.</li><li>Water Treatment experience is desirable.</li><li>Experience using a CMMS (preferably HxGN EAM) is desirable.</li><li>Minimum of 10 years related work experience in general facilities, equipment, and grounds maintenance.</li></ul> Knowledge/Skills/Abilities: <ul><li>Must be able to efficiently manage several crews simultaneously performing different tasks.</li><li>Must be experienced in all aspects of building maintenance including plumbing, carpentry, welding, roofing, masonry, and painting.</li><li>Must be experienced in land maintenance including tree work, excavation, brush clearing, road maintenance, and fence repairs.</li><li>Must be able to operate or understand heavy equipment such as a backhoe, bulldozer, skid-steer, work barge, and boats.</li><li>Must be competent in Google Office Suite.</li><li>Must be able to prepare budgets and maintain KPI reports for a team.</li><li>The successful candidate must be able to operate or ride on a boat.</li></ul> Required Certification/Licenses/Training: <ul><li>Applicants must be able to obtain an NJDEP T-1 Water treatment license within 1 year of hire.</li><li>Applicants must be able to obtain an NJDEP Pesticide Applicators license within 1 year of hire.</li></ul> Physical Requirements: <ul><li>The successful candidate must be able to lift 50 lbs.</li><li>Sitting at a desk or conference table for long periods of time is required.</li><li>The successful candidate must be able to traverse rugged undeveloped terrain.</li></ul> Additional Information Pay Range: $95000 to $105000 per year. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - Flexible Time Off Eligible for up to 10% Annual Performance Bonus. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Supervisor of General Maintenance

ResponsibilitiesHowmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets.Howmet Aerospace is currently looking a&nbsp;Maintenance Repair A&nbsp;to join our&nbsp;Howmet Casting&nbsp;plant in Dover, New Jersey. The work hours for this Weekend Day Shift could be (Friday, Saturday, Sunday 6:00A - 6:30P). Training will occur on Day Shift during the week Monday - Friday 6:30A - 3:00PNew Hire Starting Hourly Rate:&nbsp;$34.75; After 12 Months:&nbsp;$37.42$2500 Sign on Bonus payable after 90 days of employment&nbsp;(Sign on Bonus for external candidates&nbsp;only)Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership.Position Overview&nbsp; Makes repairs and does preventative maintenance on facility and manufacturing equipment.Essential Job Functions &nbsp; •&nbsp;&nbsp; &nbsp;Assists Senior Maintenance in maintaining plant mechanical and building equipment. •&nbsp;&nbsp; &nbsp;Installs piping and mechanical equipment as directed. •&nbsp;&nbsp; &nbsp;Able to trouble shoot and repair all routine mechanical failures or malfunctions and acquire some knowledge of hydraulic and pneumatic systems. •&nbsp;&nbsp; &nbsp;Assists in construction and/or repair of all plant equipment. •&nbsp;&nbsp; &nbsp;Keeps records as required. •&nbsp;&nbsp; &nbsp;Must be able to perform the duties of a B Maintenance Mechanic •&nbsp;&nbsp; &nbsp;Performs other duties as assigned by supervision. •&nbsp;&nbsp; &nbsp;Maintain all assigned work areas in as clean, orderly and safe condition as circumstances permit.EHS Requirements •&nbsp;&nbsp; &nbsp;Expected to assist in the implementation of EHS Values and policy statements and accompanying principals. •&nbsp;&nbsp; &nbsp;Comply with all department, facility, corporate and regulatory EHS regulations. •&nbsp;&nbsp; &nbsp;Wear all required personal protective equipment (PPE). •&nbsp;&nbsp; &nbsp;Report all job-related illness and injuries (Per Employee Handbook). •&nbsp;&nbsp; &nbsp;Report all safety, health and environmental concerns to your supervisor in a timely manner. •&nbsp;&nbsp; &nbsp;Attend all EHS training. &nbsp;QualificationsBASIC QUALIFICATIONS<ul> <li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li> <li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li> <li>No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.</li> <li>High School Diploma or GED from an accredited institution.</li> <li>Requires 4 years of work experience in a Manufacturing Environment in a mechanical role&nbsp;or related experience.</li></ul>PREFERRED QUALIFICATIONS<ul> <li>Ability to communicate effectively (verbal and written)</li> <li>Must be able to work flexible hours including night and weekends with little advanced notice.</li> <li>Working towards acquiring a boiler operation license. Will be required to have a boiler license after 1 year of employment</li></ul>Other Skills/Abilities<ul> <li>Familiar in repairs and location of plant air compressors, natural gas and propane systems, sprinkler valves, etc., water systems (city, well and tower boilers)</li></ul>Physical Demands<ul> <li>Frequent lifting, pushing pulling and standing in a manufacturing environment</li> <li>Requires the use of a face shield and respirator at times</li> <li>TOOLS - Lathe, Welder, Miller, Grinders, Small hand tools and safety equipment, Computers, Vacuum leak detector</li></ul>DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.About us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

Maintenance Mechanic A - Weekend Nights (Casting)

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$83,400.00-$114,600.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.&nbsp;Position Overview:&nbsp; The purpose of the Maintenance Supervisor’s role is to oversee the maintenance department responsible for all equipment and facilities within a manufacturing plant.&nbsp; The incumbent in this position will also be responsible for supervising maintenance personnel and supporting the operations of production, engineering and safety departments.&nbsp;&nbsp;&nbsp;Your Day to Day:<ul><li>Act as technical expert in regard to mechanical equipment</li><li>Supervise, set directions, and delegate daily work of assigned hourly mechanical and electrical employees to support the plant goals of safety, environmental and production</li><li>Lead safety process, training for crews and accident investigations&nbsp;</li><li>Monitor safety and environmental processes and compliance</li><li>Identify, isolate and facilitate resolution of maintenance performance issues such as quality of work and work efficiency</li><li>Troubleshoot process equipment operational problems and maintain, repair, and upgrade plant equipment</li><li>Identify and execute ways to track metrics of performance and improve production levels of employees</li><li>Share knowledge and business experience with Plant management team</li><li>Manage projects including obtaining contractor quotes, design help and directing contractor crews</li><li>Facilitate training of maintenance personnel</li><li>Identify, implement, and maintain best maintenance and safety practices</li><li>Conduct daily and monthly shift meetings</li><li>Maintain and enforce good housekeeping strategies and methodologies</li><li>Oversee the maintenance scheduling and work order system</li><li>Manage the maintenance and operations of the mobile equipment fleet and storeroom inventory</li><li>Manage hourly time and attendance process&nbsp;</li><li>Assist with MRO purchasing issues through maintenance software&nbsp;&nbsp;</li><li>May be required to perform other related duties as assigned</li></ul>What You Bring to the Team:<ul><li>High School/Technical School diploma with a minimum of 10 years of manufacturing experience in a mechanical and/or electrical maintenance role</li><li>Bachelor’s degree in mechanical engineering or related field preferred with a minimum of 5 years’ experience managing&nbsp; an industrial maintenance hourly workforce</li><li>Experience in preventative and predictive maintenance with demonstrated success in increasing equipment reliability</li><li>Working knowledge of plant systems with the ability to troubleshoot and implement corrective actions</li><li>Solid understanding of pneumatics, hydraulics, air compressor systems, cutting/welding techniques, fluid dynamic systems, and metal fabrication&nbsp;</li><li>General knowledge of mobile equipment repair, A/C and chiller systems and hydraulics</li><li>Thorough knowledge of high, medium and low voltage systems/control systems and instrumentation, and general industrial electrical</li><li>Proficient in Microsoft Word, Excel, PowerPoint, Outlook</li><li>Working knowledge in engineering drawing interpretation</li><li>Working knowledge of SAP systems preferred</li><li>Strong interpersonal, verbal, and written communication skills</li><li>Solid project management and presentation skills&nbsp;</li><li>Demonstrated leadership skills</li><li>Solid analytical and quality improvement ability</li><li>Ability to work independently and in a team environment</li><li>Ability to interface at all levels of the organization, both internally and externally</li><li>Fundamental knowledge of laws, codes, and regulations (OSHA, National Electric Code, etc.)</li><li>Proficient in Microsoft Word, Excel, PowerPoint, Outlook</li><li>Willingness to respond to emergency situations outside normal work schedule</li><li>Manages a staff of 1 salary/42 hourly employees, sets direction and deploys resources. Responsible for performance evaluations, pay reviews, hiring, and terminating.</li><li>Minimal travel required (0 – 10 days per year).</li><li>Work environment is typical of a manufacturing facility; may be exposed to environmental conditions of cold, heat, high noise levels, moving mechanical parts, heights, dust/mist/gas/fumes, extensive walking or climbing, etc.</li><li>May be required to lift, carry, push or pull up to and including 50 pounds.&nbsp;</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Johns Manville supports employee growth with vast educational opportunities and a company-wide mentoring program. This program pairs employees and leaders to grow skills, build stronger internal networks and strengthen the company’s succession planning process.&nbsp;Johns Manville also offers soft and hard skills training facilitated by internal and external presenters. Our talent management team prioritizes the holistic growth of our workforce.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Maintenance Supervisor

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $39.44.Johns Manville in Edison, NJ is recruiting for an Industrial Maintenance Mechanic/Millwright Under the direct supervision of the Plant Engineer, responsible for performing all duties in a safe, quality driven, efficient, and professional manner. Working from general instructions from the plant management team, and all levels within the organization in support of the four Johns Manville core values: People, Passion, Performance, and Protection.$39.44: Shift: 6am - 2:30pm Your Day to Day: <ul><li>Supervise/manage small projects as assigned. Work independently.</li><li>Operate various machine shop equipment such as lathes, drill presses, grinders and related equipment to make repairs.</li><li>Maintains, adjusts, services and lubricates plant equipment such as production machines, mobile equipment, pumps, valves and other process related equipment. Inspects and determines required repairs.</li><li>Maintains and makes repairs to plant buildings, facilities, utilities and area systems involving plumbing, carpentry, masonry, pipe fitting and other related crafts.</li><li>Diagnose, repair and install power transmission components - Gear boxes, couplings, chains, belts, sprockets and other related components.</li><li>Performs welding and gas cutting as required.</li><li>Diagnose, repair and install pneumatic and hydraulics systems - cylinders, hoses, pumps and valves.</li><li>Reports time and documents work orders appropriately to SAP. 9. Utilizes inventory system and assures all parts are removed and returned to inventory as required.</li><li>Assists in production line changeover and setup and ability to lead if needed.</li><li>Maintain maintenance, TPM, deviation/inspection and other required electronic and written logs as instructed</li><li>Operate overhead crane and lift devices safely &amp; efficiently</li><li>Direct multi-crafts daily in task &amp; job assignment</li><li>Lead MRO Cycle counting Process</li><li>Installation of new equipment as necessary</li><li>Observe specific parts of equipment and materials in process to determine or analyze the cause of machine malfunctions.</li><li>Repair and/or make any necessary adjustments to equipment to obtain desired operating results</li><li>Work with engineers, part/mold designers, and other management personnel to set up, operate, and debug assigned equipment</li><li>Provide ownership and input of extrusion and thermoforming processes and equipment for the reduction of downtime.</li><li>Start-up, Shutdown, &amp; Set-up of 3 of 3 of the following areas (Inline, Comets, Extrusion)</li><li>Initiate/update Preventive Maintenance (PM’s), Standard Operating Procedures (SOP’s), Pre-Task Plans (PTP’s), Safety</li><li>Audits etc., to provide efficient operation of Maintenance Department.</li></ul>What You Bring to the Team:<ul><li>Minimum of High School Diploma with technical college certification or Associates degree in technical discipline with 7 or more years of industrial experience in mechanical/electrical repairs -- or- 10 years of strong industrial experience in mechanical/electrical repairs in lieu of a formal education</li><li>Experience operating various machine shop equipment such as lathes, drill presses, grinders and related equipment to make repairs</li><li>Welding, gas cutting, and fabrication experience</li><li>Experience diagnosing, repairing, and installing power transmission components - Gear boxes, couplings, chains, belts, sprockets and other related components</li><li>Intermediate experience with Microsoft Office Suite</li><li>Flexible in work and assignments</li></ul>PHYSICAL DEMANDS: Note: The physical demands described below are representative of those that must be met by and employee to successfully perform the essential functions of this job.<ul><li>Must be able to stand for long periods of time on cement floors</li><li>Must be able to walk, stoop, kneel, bend and climb ladders and staircases</li><li>Must be able to lift up to 50 lbs. as required</li></ul>Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Industrial Maintenance Mechanic/Millwright

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.Pay Range$65,500.00-$90,100.00 AnnualThis is the base salary pay range that an applicant can expect to make upon hire. &nbsp; Pay within this range will vary based upon relevant experience, skills, and education among other factors. In addition, this position is eligible for an incentive bonus.&nbsp;The purpose of the Maintenance Scheduler's role is to minimize total maintenance costs by maximizing maintenance work force efficiency and productivity through detailed planning and scheduling of work orders. The Maintenance Scheduler is responsible for anticipating and eliminating potential delays through planning and coordination of manpower, parts, material, and equipment access. This position maintains liaison activities between Production and Maintenance Departments.Your Day-to-Day:<ul><li>Develop scope of work, cost estimates, and job requirements of work requesters</li><li>Schedule work, update the maintenance plans and include work instructions to each plan.</li><li>Open Maintenance plans in CMMS and update information such as equipment numbers, maintenance classification, budget item, or shutdown PM Place occasionally purchase requisitions for labor/materials and follow up on orders and delivery scheduling</li><li>Working with Maintenance leadership to improve work order planning and scheduling process by reviewing maintenance metrics</li><li>Responsible for scheduling Maintenance PM Shutdowns and equipment requiring maintenance</li><li>May be required to perform other related duties as assigned</li><li>Closing out work order with regards to ensuring time is entered and parts are checked out.</li><li>Update production and scheduling with maintenance plans and production equipment availability</li><li>Ability to schedule work notifications based on priority and availability of equipment.</li><li>Coordinate various maintenance planning meetings.</li></ul>What You Bring to the Team:<ul><li>High School/Technical School diploma with a minimum of 3 years of technical/mechanical and electrical work experience</li><li>Background in maintenance planning and scheduling experience</li><li>SAP knowledge is preferred</li><li>Ability to utilize and understand CMMS</li><li>Basic knowledge of mechanical systems, pneumatics, hydraulics, pumps, and rotating equipment</li><li>Proficient in Microsoft Word, Excel, Outlook</li><li>Basic understanding of electrical equipment and electronics and a solid understanding of the interface between electrical and mechanical equipment preferred.</li><li>Ability to understand ISO requirements, inspections and audits</li><li>Strong time/ project management skills</li><li>Solid organizational skills</li><li>Must have 24/7 availability</li><li>Availability to respond to any emergency situations outside of normal schedule Minimal travel required (0-10 days per year)</li></ul>Primary work environment is typical of an office setting. When in the manufacturing facility, may be exposed to environmental conditions of cold, heat, high noise levels, moving mechanical parts, heights, dust/mist/gas/fumes, extensive walking or climbing, etc.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Johns Manville supports employee growth with vast educational opportunities and a company-wide mentoring program. This program pairs employees and leaders to grow skills, build stronger internal networks and strengthen the company’s succession planning process.&nbsp;Johns Manville also offers soft and hard skills training facilitated by internal and external presenters. Our talent management team prioritizes the holistic growth of our workforce.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Maintenance Scheduler

Maintenance Mechanic A - Weekend Days (FSSu) (Casting)

Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking a&nbsp;Maintenance Repair A&nbsp;to join our&nbsp;Howmet Alloy plant in Dover, New Jersey. The work hours for this Weekend Nights Shift&nbsp;are Friday, Saturday, Sunday Night &nbsp;6PM-630AM. Training will occur on Day Shift Monday - Friday 6:00A - 2:30P New Hire Starting Hourly Rate:&nbsp;$34.75; After 12 Months:&nbsp;$37.42 Position will receive an hourly "shift premium" while assigned to an off-shift. $2500 Sign on Bonus payable after 90 days of employment&nbsp;(Sign on Bonus for external candidates&nbsp;only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. Position Overview&nbsp; Makes repairs and does preventative maintenance on facility and manufacturing equipment. Essential Job Functions • &nbsp;Assists Senior Maintenance in maintaining plant mechanical and building equipment. • &nbsp;Installs piping and mechanical equipment as directed. • &nbsp;Able to trouble shoot and repair all routine mechanical failures or malfunctions and acquire some knowledge of hydraulic and pneumatic systems. • &nbsp;Assists in construction and/or repair of all plant equipment. • &nbsp;Keeps records as required. • &nbsp;Must be able to perform the duties of a B Maintenance Mechanic • &nbsp;Performs other duties as assigned by supervision. • &nbsp;Maintain all assigned work areas in as clean, orderly and safe condition as circumstances permit. EHS Requirements • &nbsp;Expected to assist in the implementation of EHS Values and policy statements and accompanying principals. • &nbsp;Comply with all department, facility, corporate and regulatory EHS regulations. • &nbsp;Wear all required personal protective equipment (PPE). • &nbsp;Report all job-related illness and injuries (Per Employee Handbook). • &nbsp;Report all safety, health and environmental concerns to your supervisor in a timely manner. • &nbsp;Attend all EHS training. BASIC QUALIFICATIONS <ul><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.</li><li>High School Diploma or GED from an accredited institution.</li><li>Requires 4 years of work experience in a Manufacturing Environment in a mechanical role&nbsp;or related experience.</li></ul> PREFERRED QUALIFICATIONS <ul><li>Ability to communicate effectively (verbal and written)</li><li>Must be able to work flexible hours including night and weekends with little advanced notice.</li><li>Working towards acquiring a boiler operation license. Will be required to have a boiler license after 1 year of employment</li></ul> Other Skills/Abilities <ul><li>Familiar in repairs and location of plant air compressors, natural gas and propane systems, sprinkler valves, etc., water systems (city, well and tower boilers)</li></ul> Physical Demands <ul><li>Frequent lifting, pushing pulling and standing in a manufacturing environment</li><li>Requires the use of a face shield and respirator at times</li><li>TOOLS - Lathe, Welder, Miller, Grinders, Small hand tools and safety equipment, Computers, Vacuum leak detector</li></ul> Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

20 Facilities and Maintenance Jobs in New Jersey