field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

<h4>Overview</h4>The Technology Scouting and Analysis Advisor will provide strategic advisory services to program leaders and managers, identifying opportunities for technology adoption that enhance mission performance, effectiveness, and efficiency. This role supports assessment of emerging technologies, evaluation of long-term technical issues, and recommendations for enterprise-level adoption.&nbsp;LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed. Leveraging our mission-ready technology and solutions, proven expertise in federal deployment, and strategic relationships, we enhance outcomes for the government, efficiently and effectively. With a focus on agility and collaboration, LMI serves the defense, space, healthcare, and energy sectors—helping agencies navigate complexity and outpace change. Headquartered in Tysons, Virginia, LMI is committed to delivering impactful results that strengthen missions and drive lasting value.<h4>Responsibilities</h4><ul><li>Advise senior leadership on emerging technologies and potential adoption opportunities.</li><li>Evaluate current and planned systems for modernization and efficiency gains.</li><li>Identify management and technical challenges that could impact long-term performance.</li><li>Provide best practice recommendations across acquisition programs and projects.</li><li>Prepare strategic assessments and reports for program and enterprise-level decision makers.</li></ul><h4>Qualifications</h4><ul><li>Bachelor’s degree in engineering, computer science, or related technical discipline; advanced degree preferred.</li><li>Experience supporting technology evaluation, scouting, or analysis within federal or IC acquisition programs.</li><li>Knowledge of enterprise architecture, systems engineering, or emerging technology trends.</li><li>Ability to develop actionable recommendations and communicate effectively with technical and executive stakeholders.</li><li>TS/SCI with CI Polygraph clearance required</li></ul>The target salary range for this posiiton is- $82267.07 - $141358.99The salary range displayed represents the typical salary range for this position and is not a guarantee of compensation. Individual salaries are determined by various factors including, but not limited to location, internal equity, business considerations, client contract requirements, and candidate qualifications, such as education, experience, skills, and security clearances. &nbsp;<h4> LMI is an Equal Opportunity Employer. LMI is committed to the fair treatment of all and to our policy of providing applicants and employees with equal employment opportunities. LMI recruits, hires, trains, and promotes people without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, disability, age, protected veteran status, citizenship status, genetic information, or any other characteristic protected by applicable federal, state, or local law. If you are a person with a disability needing assistance with the application process, please contact <a href="mailto:accommodations@lmi.org" target="_blank">accommodations@lmi.org</a> Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Need help finding the right job? </h4>We can recommend jobs specifically for you!Click here to get started.

Technology Scouting and Analysis Advisor

ResponsibilitiesThis opening is with Howmet Aerospace – a world leader in investment casting of superalloys, aluminum and titanium primarily for jet aircraft and industrial gas turbine markets. For more information about Howmet Aerospace, visit us online at&nbsp;<a href="http://www.howmet.com/" target="_blank">www.howmet.com</a>.Howmet has challenging opportunities for individuals who are excited to engage with us in growing our business. Join us where you will be part of a dedicated team to manufacture high tech products, safely, accurately, and efficiently, you will perform a variety of hands-on operations in accordance with standardized processes within customer specifications.Howmet is currently looking for Tool Maker(s) to join our Industrial Gas Turbine (IGT) group in Hampton, Virginia. The available shift hours are 1st shift, M-F 7am-3pm and 2nd shift, M-F 3pm-11pm. Training is 1st shift, M-F 7am-3pm.New Hire Starting Rate: $28.68 p/hr.; After 6 months: $31.86 p/hr.This position will receive an hourly “shift premium” of $1.00 p/hr. while assigned to an off shift.Job Summary: The Tool Maker will analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to fabricate and repair wax injection molds, metalworking dies, jigs and fixtures, gauges, and machinists' hand tools.Essential Functions &amp; Job Responsibilities:<ul><li>Ability to read and follow the information on work instructions.</li><li>Record data either manually or by computer as required.</li><li>Studies specifications, such as blueprints, sketches, models, or descriptions and visualize product to determine materials. required and machines to be used to fabricate parts.</li><li>Computes dimension, plan layout, and determine assembly method and sequence of operations.</li><li>Measures, marks, and scribes metal stock for machining.</li><li>Sets up and operates machine tools, such as lathes, milling machine, and grinder to machine parts and verifies conformance of machined parts to specifications.</li><li>Lifts machined parts and positions and secure parts on surface plate or worktable.</li><li>Smooth flat and contoured surfaces and fits and assembles parts together into assemblies and mechanisms.</li><li>Verifies dimensions, alignments, and clearances.</li><li>Heat-treat tools or parts.</li><li>Examines new or previously used dies, tools, jigs, and fixtures, and recommends design modifications regarding construction and function of part.</li><li>Develops specifications from general descriptions for specialty tools and draws or sketches design of product.</li><li>Must be detail oriented and possess the ability to machine parts with tight tolerances.</li><li>Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime.</li></ul>Skills and Abilities:<ul><li>Ability to read and interpret documents, such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.</li><li>Ability to work with mathematical concepts, such as fundamentals of plane, solid geometry and trigonometry. Ability to apply concepts, such as fractions, percentages, ratios, and proportions to practical situations.</li><li>Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or scheduled form.</li><li>Ability to setup, program, and operate CNC machines.</li><li>Ability to create CAD models and drawings to use with CAM software.</li></ul>Equipment Used: Vertical milling machine, Bridgeport EZ Trax/Acu-Rite milling machine, tree journeyman CNC milling machine, personal computer, engine lathe, band saw, radial arm drill press, floor drill, pedestal grinder, surface grinder, precision tool grinder, abrasive cutoff saw, bridge crane heat treat oven, welding machine, acetylene torch, air grinders, power tools, and hand tools.QualificationsBasic Qualifications:<ul><li>An application must include a resume and two professional references for review and consideration.</li><li>This position requires a minimum of high school diploma or GED certificate.</li><li>This position requires a minimum of five years of toolmaker and CNC programming experience and/or training.</li><li>Must be available for all shifts. Must be able to work overtime and weekends as the schedule varies depending on site operational needs; flexibility is required.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul>About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> AboutThe Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

Toolmaker/CNC Programmer

Position Title: Engineering &amp; Technology Program Coordinator Department: Career &amp; Technical Education (CTE) Division: Career &amp; Technical Education (CTE) Employee Status: Full-time Type: Professional Staff Association (PSA) Grade: L Salary: ($66,791-$71,773 annually) FLSA: Exempt ICCB Classification: Professional/ Technical Location: Multiple Locations; Rockford, IL and Belvidere, IL Employment Notice: Rock Valley College does not offer sponsorship for employment-based visas for this position now or in the future. Applicants must be currently authorized to work in the United States without the need for employer sponsorship. Application Deadline:&nbsp;January 4th, 2026&nbsp; Reporting Relationships Reports to: Dean of Career and Technical Education (CTE) Supervision Exercised: Supervision may be exercised over student employees and lab technician. &nbsp; Job Summary The coordinator is responsible for developing, managing, and supporting manufacturing, mechatronics, engineering technology, electrical/electronics, engineering, and apprenticeship programs. This includes industry collaboration, faculty support, student engagement, and oversight of lab operations. The role ensures that programs remain current, industry-relevant, and aligned with workforce needs while also supporting faculty, recruitment efforts, and student success. The coordinator supports teaching and learning through curriculum development, program assessment, and teaching of coursework under the direction of the Dean. Essential Duties and Responsibilities include the following. Related duties may be assigned. &nbsp; Program Development &amp; Curriculum Management 1. Oversee implementation and continuous improvement of curriculum for manufacturing, mechatronics, engineering technology, and apprenticeship programs. 2. Ensure programs meet regional industry demands and align with workforce development needs. 3. Work with faculty and industry partners to review, update, and modernize course content. 4. Ensure compliance with accreditation and certification requirements. 5. Assist in developing new courses and programs based on employer feedback and student interest. &nbsp; Faculty &amp; Instructional Support 1. Teach courses in Manufacturing, Mechatronics, Electrical and/or Engineering Technology, as needed based on candidate credentials. (Courses taught outside of normal working hours will be compensated by additional stipend.) 2. Provide guidance and support for adjunct faculty in program delivery. 3. Assist with faculty recruitment, training, and evaluation as needed. 4. Support faculty with instructional resources, labs, and classroom technology. 5. Serve as contact person and software administrator for instructional technology and resources, such as Amatrol. 6. Proctor certification testing for students as part of their coursework, such as NIMS Certification. &nbsp; Industry Engagement &amp; Advisory Committees 1. Collaborate with local employers and industry experts to align curriculum with workforce needs. 2. Organize and participate in Advisory Committee meetings to gather industry input. 3. Develop partnerships with employers to support internships, career pathways, and hands-on learning opportunities. 4. Coordinate Apprenticeships by maintaining student rosters, apprentice programs of study with industry partners, fostering external industry relationship and troubleshooting ongoing student/industry needs, communicating with related RVC departments and faculty. &nbsp; Lab &amp; Equipment Oversight 1. Work with the Lab Technician to maintain equipment functionality and readiness. 2. Ensure software and hardware resources are updated and available for instruction. 3. Develop budget recommendations for equipment purchases and program expansion. 4. Collaborate with IT and faculty to update or acquire instructional technology (e.g., SolidWorks, Mastercam, Immerse2Learn). &nbsp; Student Recruitment, Retention, &amp; Success 1. Coordinate with Marketing, Student Services, and faculty to recruit students into the programs. 2. Support student retention and completion efforts, ensuring they have the resources needed to succeed. 3. Assist students in career preparation, including industry certifications and job placement support. 4. Participate in campus and community outreach events to promote Engineering and Technology programs, including summer camps. 5. Assist with the coordination of the NIU @ RVC program, including recruitment, student success efforts, and alignment with NIU’s College of Engineering. 6. Assist in work-based placement (e.g., internships, apprenticeships, post-graduation opportunities). &nbsp; Administrative Responsibilities 1. Ensure classroom and lab schedules are accurately assigned to courses each semester. 2. Work with the Administrative Assistant to verify that all instructors have access to classrooms, storage closets, and equipment. 3. Manage software renewals and updates for instructional programs (SolidWorks, Mastercam, Immerse2Learn). 4. Collaborate with IT to ensure all classroom and lab computers have updated software for instructional use. 5. Maintain accurate student records, program reports, and institutional documents. 6. Attend college meetings, workshops, and professional development opportunities. 7. Represent the program at college-wide and external events. 8. Ensure compliance with safety regulations, institutional policies, and industry standards. 9. Coordinate and manage the application, registration, record keeping, and academic progress of apprenticeship students. Additional -Additional duties as assigned Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications 1. Bachelor’s degree in a related field (e.g., Engineering, Education, or Business) or an Associate of Applied Science degree in a related technical field (e.g., Engineering Technology, Manufacturing, or Mechatronics) or Certificate of Completion/Industry-recognized credential with 2 years of related work experience. 2. At least one year of work experience in a relevant engineering, manufacturing, educational, or technical field. 3. Knowledge of and experience in manufacturing, engineering, Career and Technical Education (CTE), or workforce development fields. 4. Strong communication, organizational, and problem-solving skills, with the ability to work independently and collaboratively with faculty, staff, students, and industry partners to support program operations and continuous improvement. 5. Proficiency with standard computer applications and data management tools. 6. Valid driver’s license. &nbsp; Preferred Qualifications 1. One to three years of experience in manufacturing, engineering technology, mechatronics, or Career and Technical Education (CTE) programs. 2. Experience with budget coordination, scheduling, or resource planning for academic or training programs. 3. Experience supporting or delivering technical instruction in an educational or training environment. 4. Experience managing instructional labs or facilities, including equipment maintenance, purchasing, and safety compliance. 5. Familiarity with software or technologies commonly used in engineering and manufacturing education (e.g., design, simulation, or automation tools). 6. Experience collaborating with employers, industry partners, or workforce development organizations. &nbsp; Work Environment While performing the duties of this job, the employee regularly works in an office and instruction lab setting. Frequent interaction with faculty, students, and external partners. Occasional evening or weekend hours required for special events, recruitment efforts, and test proctoring. Location will be at the Main Campus in Rockford, IL and the Advanced Technology Center in Belvidere, IL &nbsp; Physical Demands Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel, or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear.

Rock Valley College

Engineering and Technology Program Coordinator

Position Title: Engineering &amp; Technology Lab Technician Department: Career &amp; Technical Education (CTE) Division: Career &amp; technical Education (CTE) Employee Status: Full-time Type: Professional Staff Association (PSA) Grade: J Salary: ($49,000 -$54,000 annually) FLSA: Exempt Location: Multiple Locations; Rockford, IL and Belvidere, IL ICCB Classification: Professional/ Technical Employment Notice: Rock Valley College does not offer sponsorship for employment-based visas for this position now or in the future. Applicants must be currently authorized to work in the United States without the need for employer sponsorship. Application Deadline:&nbsp;January 4th, 2026&nbsp; Reporting Relationships Reports to: Dean of Career and Technical Education (CTE) Supervision Exercised: None &nbsp; Job Summary The Lab Technician is responsible for maintaining and supporting the operational integrity of the manufacturing, electrical/electronics, mechatronics, and engineering labs. This includes equipment maintenance, stocking supplies, enforcing safety procedures, and assisting instructors and students with lab setup and operations. The Lab Technician will work closely with faculty, the program coordinator, and students to ensure the labs are fully equipped, well-maintained, and conducive to hands-on learning. This collaborative role involves troubleshooting technical issues, providing technical support, and helping create an effective learning environment that aligns with academic objectives. Essential Duties and Responsibilities include the following. Related duties may be assigned. &nbsp; Equipment &amp; Lab Maintenance 1. Ensure all lab equipment is properly set up, maintained, and operational. 2. Perform routine maintenance, troubleshooting, and repairs on lab equipment, including CNC machines, robotics, PLCs, 3D printers and hydraulic/pneumatic systems. 3. Coordinate specialized repairs with external vendors. 4. Clean and maintain machines, tools, and workspaces to ensure a safe and organized environment. 5. Monitor and replenish PPE supplies (e.g., safety glasses, ear protection) and ensure compliance with safety regulations. 6. Check and top off coolant levels in CNC machines and other required systems. 7. Perform weekly inspections of 3D printers and replace worn/damaged components as needed. 8. Manage machine shop cleaning and waste disposal, including coolant disposal coordination. 9. Ensure all safety signage is present and up to date. 10. Coordinate with IT to install or update software for instructional equipment. 11. Ensure all classroom and storage closet locks are functional, including battery replacement for electronic locks. Inventory &amp; Supplies Management 1. Maintain inventory of materials, tools, and consumables, ordering replacements as needed. 2. Work with vendors to procure parts, materials, and consumables for courses and training programs. 3. Organize and label tool storage areas for ease of use by instructors and students. 4. Monitor expiration dates and usability of supplies such as cutting tools, lubricants, and electronic components. 5. Ensure all classrooms and labs that require PPE have a sufficient supply (e.g., safety glasses, earplugs). 6. Develop budget recommendations for equipment repair, replacement, and preventative maintenance. Lab Support &amp; Course Setup 1. Prepare classrooms and labs before the start of each semester (e.g., ensuring working projectors, computers, whiteboards, and classroom furniture are properly arranged). 2. Assist instructors with setting up lab exercises and demonstrations. 3. Ensure all labs have the appropriate number of chairs and workstations per course enrollment. 4. Maintain access control by ensuring faculty and authorized students have access to required rooms and storage areas. 5. Work with faculty to schedule machine access and lab time. 6. Support faculty and students with hands-on technical troubleshooting. 7. Check that classroom overhead projectors and document cameras (ELMO) are in working condition. 8. Ensure paper printers are stocked and functional in all relevant classrooms/labs. 9. Serve as contact person and software administrator for instructional technology and resources, such as Amatrol. 10. Proctor certification testing for students as part of their coursework, such as NIMS Certification. Safety &amp; Compliance 1. Enforce safety procedures, ensuring that students and staff follow PPE and equipment usage guidelines. 2. Perform routine safety checks and report hazards or broken equipment. 3. Ensure lab compliance with OSHA and institutional safety regulations. 4. Assist in emergency lab evacuations and incident reporting. Additional 1. Teach courses in Manufacturing, Mechatronics, Electrical and/or Engineering Technology, as needed based on candidate credentials. Courses taught outside of normal working hours will be compensated by additional stipend 2. Participate in campus and community outreach events to promote Engineering and Technology programs, including summer camps. 3. Additional Duties as assigned Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications 1. High School diploma or equivalent and industry-recognized credential in industrial maintenance, manufacturing technology, mechatronics, or a related technical field. 2. At least one year of hands-on experience with manufacturing or industrial systems such as CNC machines, robotics, PLCs, or fluid power systems. 3. Demonstrated mechanical and troubleshooting skills related to equipment setup, maintenance, and repair. 4. Knowledge of lab and shop safety procedures and ability to enforce safe operating practices. 5. Ability to lift, move, and install lab or shop equipment as required. 6. Basic computer proficiency (email, spreadsheets, equipment or inventory software). 7. Effective communication and teamwork skills to assist instructors and students in a fast-paced lab environment. 8. Valid driver’s license. &nbsp; Preferred Qualifications 1. Associate’s degree in industrial maintenance, mechatronics, manufacturing technology, or a related technical field. 2. Two or more years of experience maintaining, troubleshooting, or repairing industrial or educational lab equipment. 3. Experience supporting instructional activities and ensuring lab equipment and materials are ready for student use. 4. Experience managing lab operations, including calibration, inventory control, preventative maintenance, and coordinating with vendors. 5. Familiarity with industrial automation and control systems (e.g., PLCs, robotics, pneumatics, and hydraulics). 6. Knowledge of safety standards such as OSHA, lockout/tagout, and lab safety compliance. &nbsp; Work Environment The job requires working in lab spaces with heavy machinery, electrical components, and manufacturing tools. Frequent standing, lifting, and manual labor required. Occasional work in office and classroom settings for administrative tasks. Some evening and weekend hours may be required based on course schedules. &nbsp; Physical Demands Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel, or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear.

Engineering and Technology Lab Technician

ResponsibilitiesCMM ProgrammerHowmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at <a href="http://www.howmet.com/esg-report" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. &nbsp;Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>The Production Planner is responsible for providing an interface between customers and in-house personnel,&nbsp;this involves scheduling, coordinating, and monitoring the expedient flow of parts through the manufacturing processes to satisfy the customers’ delivery requirements and maintaining customer relationships with key accounts by communicating these schedules.&nbsp;The position is responsible for CMM programming, Structured Light (ATOS Blue Light) measurement programming, Best fit software programming, and NX cad modeling.Job Responsibilities<ul> <li>Develop Dimensional inspection programs using various programming languages such as Visual Basic and Python based on requirement definitions, customer blueprints, CAD models, and specifications to be used for manufacturing data collection, analysis, and distribution.</li> <li>Support existing programs by troubleshooting, implementing modifications, or adding new information as required.</li> <li>Detailed understanding of co-ordinate metrology including the principles of CMMs, and CMM Manager software. Work with end users to create requirement definitions and functional designs for enhancements to existing programs and for development of new applications.</li> <li>Use NX cad software to extract geometric information from CAD models required to generate CMM and Structured light measurement part programs. Electronic data management, manipulation of electronic data using NX to assist in tool builds, gating builds and production of gating schemes. Supporting engineering in analyzing electronic models and working with casting houses and various tooling houses. Perform all documentation necessary to satisfy customer and quality requirements.</li> <li>Instruct end users in the use of applications.</li> <li>Other responsibilities as assigned.</li></ul>Skills and Abilities:Reads, analyzes, and interprets general business periodicals, professional journals, technical procedures, or governmental regulations. Write reports, business correspondence, and procedure manuals. Effectively presents information and respond to questions from groups of managers, clients, customers and the general public.Works with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.&nbsp; Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Defines problems, collects data, establishes facts, and draw valid conclusions.&nbsp; Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QualificationsBasic Qualifications Education: Associate's degree in a technical field -OR- High School diploma/equivalent with five (5) year's comparable technical experience. Experience: Seven (7) years related experience and/or training. •&nbsp;&nbsp;&nbsp;&nbsp;Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. •&nbsp;&nbsp;&nbsp;&nbsp;This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. &nbsp;About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Senior CMM Programmer

Responsibilities CMM Programmer Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at <a href="http://www.howmet.com/esg-report" target="_blank">www.howmet.com/esg-report</a>. Follow:&nbsp;<a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>,&nbsp;<a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>,&nbsp;<a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>,&nbsp;<a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and&nbsp;<a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. &nbsp; Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> The Production Planner is responsible for providing an interface between customers and in-house personnel,&nbsp;this involves scheduling, coordinating, and monitoring the expedient flow of parts through the manufacturing processes to satisfy the customers’ delivery requirements and maintaining customer relationships with key accounts by communicating these schedules.&nbsp; &nbsp; &nbsp;&nbsp;The position is responsible for CMM programming, Structured Light (ATOS Blue Light) measurement programming, Best fit software programming, and NX cad modeling.Job Responsibilities<ul> <li>Develop Dimensional inspection programs using various programming languages such as Visual Basic and Python based on requirement definitions, customer blueprints, CAD models, and specifications to be used for manufacturing data collection, analysis, and distribution.</li> <li>Support existing programs by troubleshooting, implementing modifications, or adding new information as required.</li> <li>Detailed understanding of co-ordinate metrology including the principles of CMMs, and CMM Manager software. Work with end users to create requirement definitions and functional designs for enhancements to existing programs and for development of new applications.</li> <li>Use NX cad software to extract geometric information from CAD models required to generate CMM and Structured light measurement part programs. Electronic data management, manipulation of electronic data using NX to assist in tool builds, gating builds and production of gating schemes. Supporting engineering in analyzing electronic models and working with casting houses and various tooling houses. Perform all documentation necessary to satisfy customer and quality requirements.</li> <li>Instruct end users in the use of applications.</li> <li>Other responsibilities as assigned.</li></ul>Skills and Abilities:Reads, analyzes, and interprets general business periodicals, professional journals, technical procedures, or governmental regulations. Write reports, business correspondence, and procedure manuals. Effectively presents information and respond to questions from groups of managers, clients, customers and the general public.Works with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.&nbsp; Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.Defines problems, collects data, establishes facts, and draw valid conclusions.&nbsp; Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.QualificationsBasic QualificationsEducation:Associate's Degree in a technical field -OR- High School diploma/equivalent with two (2) years comparable technical experience.Experience:Five (5) years related experience and/or training.•&nbsp;&nbsp;&nbsp;Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.•&nbsp;&nbsp;&nbsp;&nbsp;This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.About us﻿Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at&nbsp;<a href="https://www.howmet.com/esg-report/" target="_blank">www.howmet.com/esg-report</a>. Follow: <a href="https://www.linkedin.com/company/howmet-aerospace" target="_blank">LinkedIn</a>, <a href="https://twitter.com/howmetaerospace" target="_blank">Twitter</a>, <a href="https://www.instagram.com/howmetaerospace/" target="_blank">Instagram</a>, <a href="https://www.facebook.com/Howmetaerospace/" target="_blank">Facebook</a>, and <a href="https://www.youtube.com/howmetaerospace" target="_blank">YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

6 IT / Computer Engineering Jobs in Virginia