field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Please visit our website for more information - <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Responsible for safely transporting hazardous and non-hazardous materials from the customer site to the appropriate designated sites using van trailers, straight trucks, flatbeds, tankers, roll-off frames, or other waste carrying equipment. Ensures that the condition of the material packaging meets the U.S. Department of Transportation (DOT) specifications, inspects manifests and shipping paperwork for accuracy, and maintains current transportation permits for all areas traveled. Abides by all regulations set forth by DOT, EPA, state and local governments, and VES-TS policies and procedures. Primary Duties /Responsibilities: <ul><li>Perform daily inspections of vehicle and/or trailer prior to driving to ensure the safety and integrity of equipment going to designated sites.</li><li>Prior to transporting materials reviews shipment records, manifests, container labeling, vehicle placards, and integrity of loaded drums, roll-off boxes or bulk tankers.</li><li>Driving within the local market, ensures that DOT requirements such as load weight limits, driver log books, Vehicle Inspection Records, transportation permits, insurance cards, fuel trip reports, IFTA fuel stickers, or other paperwork is up to date and valid.</li><li>Consults with customers pertaining to load conditions, drum counts or paperwork inconsistencies to ensure that materials can be properly transported to designated site(s).</li><li>Notify immediate supervisor of any moving violations and/or accidents in-route to and/or from sites. </li><li>Assist in the loading/unloading of materials at designated sites utilizing appropriate equipment. </li><li>Responsible for assisting with housekeeping as required.</li><li>Other duties as assigned</li></ul> Qualifications Education / Experience / Background: <ul><li>High School diploma or General Educational Development (GED) required </li><li>Prior commercial driving experience required</li></ul> Knowledge / Skills / Abilities: <ul><li>Familiarity with U.S. Department of Transportation (DOT) regulations pertaining to the transportation of hazardous and non-hazardous materials</li><li>Strong team player</li><li>Excellent interpersonal and communication skills</li><li>Time management: the ability to organize and manage multiple tasks</li><li>Strong customer service orientation</li></ul> Required Certification / Licenses / Training: <ul><li>Valid Class B Commercial Driving License (CDL) as required</li><li>Hazmat (H) endorsement required</li><li>40-Hour HAZWOPER training preferred</li></ul> Additional Information Targeted Hourly Pay: $30 Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - 15 days Eligible for up to 4% annual performance bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Local Driver Class B

Specialist, Transportation Operations (Outbound) At Chanel, we are focused on creating an inclusive culture that nurtures personal growth, contributing to collective progress. We believe the uniqueness of each individual increases the diversity, complementarity and effectiveness of our teams. We strongly encourage your application, as we value the perspective, experience and potential you could bring to CHANEL. About the role: The strategic management of global transportation has never been so important. We operate in an fast-paced supply chain environment with challenging requirements and increasing customer demands. It is vital to provide clear visibility to incoming products in the supply chain and deliver the best possible transportation service and solutions to meet the needs of our clients.The Transportation Outbound Operations Specialist, serves as the main point of contact for coordinating CHANEL domestic shipments from the CHANEL distribution centers, 3PL facilities and boutiques for delivery to external clients, retail partners, 3PL ecommerce fulfillment center, CHANEL boutiques, and CHANEL field and corporate locations.What impact you can create at CHANEL:<ul><li>Oversee the planning and routing of all collect F&amp;B outbound orders in compliance with the MBR partner’s inbound routing guidelines</li><li>Schedule all prepaid F&amp;B outbound shipments to corporate offices, boutiques and ecom 3PL facility with the appropriate transportation carrier/mode including TL, LTL, weekly messenger runs and daily parcel shipments. </li><li>Collaborate with the Fashion Account Management team and Schenker Control Tower to manage and monitor outbound Fashion shipments to boutiques </li><li>Partner with Fashion Account Management team on collection launch &amp; shipping strategy </li><li>Oversee the Fashion boutique dedicated delivery operations </li><li>Support the WFJ vault with shipping requests and coordination of high jewelry movements</li><li>Manage carrier claims program including outlining clear procedures, providing claims status reporting to key internal stakeholders and oversee the creation and resolution of outstanding freight claims</li><li>Own the parcel/courier carrier administration process including account setup, user setup/deactivation, carrier performance reviews and KPI management</li><li>Proactively problem solve and communicate with appropriate departments when order, product or customer service issues arise</li><li>Join internal team calls with Account Management and Distribution to review monthly business goals, current workloads and order release schedule</li><li>Keep up to date on customer routing guidelines and regularly review CHANEL SOP’s to ensure Transportation Operations processes are aligned with customer requirements. </li><li>Collaborate with F&amp;B dock manager and Fashion warehouse on daily&nbsp;Fedex&nbsp;capacity needs and&nbsp;manage daily pickup schedule​</li><li>Coordination of special transportation projects including employee&nbsp;sales, events, new store openings,&nbsp;adhoc&nbsp;requests​</li><li>Proactively monitor&nbsp;Fedex&nbsp;daily exception tracking reports​</li><li>Support ad hoc network and lane analysis requests to identify opportunities to implement delivery solutions that improve delivery service and/or cost </li></ul>You are energized by:<ul><li>Building cross functional relationships across multiple departments and divisions</li><li>Utilizing data to identify gaps in current processes and propose high impact solutions to support business growth and development</li><li>Working in a highly collaborative environment while managing multiple workflows and priorities</li><li>Creative, strategic and solution focused thinking and ways of working</li><li>Crafting process flow mapping to key business processes</li><li>Leading cross functional projects and process improvement initiatives</li></ul>Position Logistics:<ul><li>Bachelor’s degree in related field – preferably international Business or Supply Chain<ul><li>In lieu of degree CHANEL will accept 2 to 4 years of hands on experience managing domestic logistics (Fashion and fragrance &amp; beauty industry a plus)</li></ul></li><li>Experience in SOP creation and outlining operational process flows </li><li>Solid working knowledge of domestic transportation modes, shipping documentation and HAZMAT requirements</li><li>Ability to understand technology as it relates to the business.</li><li>Demonstrated ability to effectively manage working relationships with both technical and business professionals.</li><li>High proficiency with computer systems and software applications.</li><li>Superior communication skills (both written and oral)</li><li>Solid analytical and problem-solving skills</li><li>Partially Remote: Role requires a minimum of three days in-person office presence at the designated location/office.</li></ul>*Chanel, Inc. reserves the right to edit, change, or make exceptions on designations where circumstances where deemed appropriate. Compensation:<ul><li>The anticipated base salary range for this position is $61,400 through $80,000. Base salary is one component of the total compensation for this position. Other forms of variable pay may be offered for this position. Other components will include bonus potential, benefits, and/or perks. </li></ul>Benefits and Perks:<ul><li>Wellbeing resources include dedicated paid time off for wellbeing (2-week August Office Closure) and a Wellbeing fund</li><li>Family and care giving benefits (inclusive of parental leave, fertility support, MilkStork, and Care.com Membership)</li><li>Generous paid time off policies to include vacation, holiday, sick and volunteer days</li><li>401K and other incentives</li><li>Robust healthcare offerings; medical, dental, vision, MDLIVE (virtual care), One Medical, Flexible Spending Accounts (Health Care &amp; Dependent Care), Health Savings Account and Employee Assistance Program</li><li>Life insurance, Accidental Death &amp; Dismemberment, Short Term Disability, Long Term Disability, Health Advocate, International Business Travel Accident &amp; Medical, and Commuter Transit &amp; Parking</li></ul>Additional Information:Chanel is a private company whose values are grounded in creating the conditions for people to perform at their best and feel fulfilled and confident in their work. We offer a unique work environment where individuals are encouraged to better understand the brand, the business, and motivations, so that together we can unlock the possibilities of growth. This is reflected in: Diversity and Inclusion:<ul><li>At CHANEL, we are intentional in promoting Diversity &amp; Inclusion. We foster respect, empathy and dignity for all.&nbsp; We believe strongly that the diversity of our people across the full spectrum of human differences is essential to our organisation and the connections we have with each other and our clients.</li><li>We offer Employee Resource Groups in the US that are voluntary, open to all, employee-led groups formed around a shared identity or lived experience, whose aim is to foster a diverse, inclusive, and equitable community aligned with the values and missions of the communities they support. </li></ul>Chanel Community:<ul><li>CHANEL Community empowers our employees to channel their passions, talents and sense of purpose to contribute to and learn from our communities.</li><li>Employees are encouraged to take time off annually to volunteer through CHANEL Community. CHANEL also matches employee donations to select charitable organizations. </li></ul>Sustainability:<ul><li>CHANEL Mission 1.5° is our climate action plan. It is focused on transforming the business in line with the ambitions of the Paris Agreement on climate change to limit the average global mean temperature increase to 1.5 degrees Celsius above preindustrial levels.</li><li>Employees are encouraged to contribute to our US Sustainability efforts at the corporate level and within the divisions, through organized taskforces and initiatives. </li></ul>Arts and Culture:<ul><li>We are committed to extending our legacy of cultural engagement. Global support includes the CHANEL Culture Fund, which supports a select group of leading art culture institutions across the globe, and the CHANEL Next Prize for the next generation of creative talent.&nbsp; US support currently includes Annual sponsorship of the MoMA film program, Tribeca Film Festival programs and Through Her Lens, Support of the Academy Gold Fellowship for Women and Sponsorship of the BAAND Together Dance Festival at Lincoln Center. </li></ul>Fondation Chanel:<ul><li>Since 2011, Fondation CHANEL’s mission is for women and girls to be free to shape their own destiny.&nbsp; Through multi-year partnerships with financial and technical support, Fondation CHANEL is committed to improving the safety and autonomy of women and adolescent girls around the world, impacting over a million women and girls in its first 10 years.&nbsp;&nbsp;&nbsp;&nbsp;</li><li>For more information, please navigate to the Fondation Chanel website here&nbsp;&nbsp;</li></ul>Career and Leadership Development: <ul><li>We have dedicated in-house teams focused on supporting the onboarding of employees, developing leadership skills via custom programs like Imagine Chanel People, Heart of Leadership and group and individual coaching, and blended online and live classes offered on our Bloom platform and by skilled trainers, such as Shape Your Career, to develop career building skills.</li></ul>*Chanel, Inc. benefits and perks are dependent on eligibility and subject to modification by Chanel at any time.

Chanel

Specialist, Transportation Operations

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy.A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments.CompensationThe base hourly rate for this position is $37.16.Essential Duties and Responsibilities:<ul><li>Be an active participant in the safety process and practice safe work habits at all times.</li><li>Perform mechanical preventative maintenance according to an established schedule on all equipment.&nbsp; Inspect machinery, lubricate and made adjustments or repairs as needed and take faulty equipment out of operation until repaired.</li><li>Effectively troubleshoot all mechanical equipment to identify issues and take necessary corrective actions to repair, replace or rebuild.</li><li>Maintain an open and candid working relationship with coworkers from all departments and immediate supervisor/manager.</li><li>Perform other job functions as requested to support the effective and efficient operation of the plant, including duties of other classifications.</li><li>Read, interpret and follow blueprints and sketches, making all measurements and calculations necessary to complete the job.</li><li>Make out work orders, requisitions, inspection reports, time distribution, material usage, etc., and perform other clerical duties necessary to maintain proper records relative to the work performed.</li><li>Direct, assist, and instruct other workers on jobs where it is necessary to work together or when requested by supervisor.</li><li>Inspects/maintains plant buildings and maybe required to cast concrete forms and bollards as needed.</li><li>Operate, maintain, inspect, lubricate and repair all plant systems as required.</li><li>Familiar with maintenance management software systems with light keyboarding skills to post time, materials, comments and feedback on work orders.&nbsp; To initiate or create reactive work orders for urgent type of work which arises on a shift.</li><li>Member of the emergency response team.&nbsp; Duties include dealing with self-contained breathing equipment, full spill emergency equipment, firefighting equipment, training in CPR and First Aid.&nbsp; Expectations – full knowledge and ability to use.</li><li>Plans and lays out work assignments to accomplish them with maximum efficiency.</li><li>Prepares, reads, interprets and follows complex blueprints, diagrams, and sketches, making all measurements and calculations necessary to complete job.</li><li>May operate mobile equipment.</li><li>Performs water treatment and fire protection equipment tests following prescribed methods.&nbsp; Adds materials and makes corrections and repairs based on test results.</li><li>During cleanouts and emergencies, may work with other maintenance employees, performing any duties to get equipment back into operations in minimum time.</li><li>Directs, assists, and instructs other maintenance employees on jobs where it is necessary to work together or when requested by supervision.</li><li>Makes out work orders, requisitions, inspection reports, time distribution, material usage, etc., and performs other clerical duties necessary to maintain proper records relative to the work performed.</li><li>Must maintain the necessary tools for above classification where required and be proficient in their use and care.</li><li>Always use safe work practices, follow all safety rules and procedures, immediately report any hazardous conditions, and fully participate in safety programs.</li><li>Wear all personal protective equipment as required by management, including but not limited to all or some of the following; protective shoes, glasses, ear plugs, bump cap or hard hat, gloves, dust mask, or respirator.</li><li>Complete monthly CBTs or other training as required.</li><li>Keep equipment and work area clean and orderly at all times.&nbsp;</li><li>Occasional instruct new or lesser experienced employees on the job.</li><li>Complete all necessary training assignments.</li><li>Complete SAP data entry.</li><li>Performs other related duties as directed including duties of lower classification.&nbsp; Perform other duties as assigned by the supervisor.</li></ul>Supervisory ResponsibilitiesThis job has no supervisory responsibilities.Education and/or Experience<ul><li>High school diploma or general education degree (GED).</li><li>Mechanical journeyman certification, or 5+ years of verified experience as an industrial maintenance mechanic.</li><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and drawings.</li><li>Demonstrated ability to troubleshoot and handle multiple priorities and projects.</li><li>Ability to write routine reports and correspondence legibly.</li><li>Computer skills (Microsoft Office).</li><li>Experience with machine safety.</li><li>Experience with lockout/tagout.</li><li>Lift truck operations, JLG, etc. and the ability to obtain a license to operate.</li></ul>Language SkillsAbility to read, write, and comprehend simple instructions, short correspondence, and memos.&nbsp; Ability to effectively present information in one-on-one and small group situations.Mathematical SkillsAbility to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Reasoning AbilityAbility to apply common sense understanding to carry out detailed, straightforward written or verbal instructions.Certificates, Licenses, RegistrationsAs required by position:<ul><li>Forklift Certified</li><li>Confined Space</li><li>Log Out Tag Out</li><li>Fit testing as required</li></ul>Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.&nbsp;While performing the duties of this job, the employee is regularly required to stand and walk.&nbsp; The employee is occasionally required to sit; use hands to finger, handle, or feel; reach with hands and arms and communicate accurately with coworkers.&nbsp; The employee will frequently engage in repetitive motions.&nbsp; The employee must frequently, lift, push or pull 50 pounds and must occasionally lift and/or move up to 100 pounds with assistance. Visual acuity is required to work around and with machinery including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Work EnvironmentThis job is in an industrial, manufacturing environment.&nbsp; The job requires working frequently around and with heavy machinery with moving mechanical parts, industrial ovens, and mobile equipment.&nbsp; The environment is not climate controlled and employees must be able to work in environments that may be extremely hot and humid or cold depending upon the operation and the season.&nbsp; Walking surfaces can be wet, dusty, and uneven.&nbsp; Areas of the building where work must be done have high noise levels, vibration, and/or fumes.&nbsp; Some working areas contain the presence of airborne particles which can irritate the skin or eyes.&nbsp; The manufacturing process involves toxic or caustic chemicals.&nbsp; Employees are required to wear personal protective equipment which includes steel toed shoes, ear protection, eye protection, gloves, head protection and in certain areas may be required to where dust masks or respirators.Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team.Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees.Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs.Diversity &amp; Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&amp;I council is composed of employees from locations across North American &amp; Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&amp;I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity &amp; inclusion initiatives on JM’s Career page.Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Johns Manville

Maintenance Mechanic

<h4>Overview</h4>Why Singer?Singer Equipment Company, is not just a seller of food equipment – we cultivate partnerships and amplify success. Singer isn’t just a place to work; it’s a place to thrive. We empower our employees, fostering an environment where they can grow professionally and contribute to something larger than themselves.We are the proud recipient of the Foodservice and Supplies Dealer of the Year award for 2023. Our commitment to our customers has earned us an unbeatable reputation within our industry.&nbsp;This is your opportunity to join a winning team!At Singer Equipment Company, we value each and every one of our dedicated staff and therefore are pleased to offer a competitive starting wage, a comprehensive benefits package including: medical, dental, vision, short term and long-term disability, 401K with company match, group life insurance, flexible spending, paid time off, and paid holidays.Why You'll Love Working Here:<ul><li>Make a Difference: Work with enthusiasm and integrity while ensuring communication, coordination and collaboration.</li><li>Cutting-Edge Tools: Work with industry-leading CAD and AutoQuotes software.</li><li>Collaborative Spirit: Be part of a supportive and dynamic team environment.</li><li>Growth Opportunities:&nbsp;Develop your skills and advance your career in a dynamic industry.</li><li>Competitive Compensation &amp; Benefits:&nbsp;Enjoy a rewarding package that reflects your contributions.</li></ul><h4>Responsibilities</h4>Singer Equipment, the largest foodservice equipment and supplies distributor in the mid-Atlantic region, is hiring experienced full time local&nbsp;Day Shift Driver/Warehouse Worker to join their warehouse team.<ul><li>LOCAL routes only! No Weekends!</li><li>Drive/operate box truck to transport orders between customer locations.</li><li>Manually handle equipment from pallets and load to hand truck to transport customer orders into the facility.</li><li>Utilize palletjack to move pallets of product to and from truck to delivery location.</li><li>Communicate with customer and/or supervisor using handheld devices.</li><li>Conduct daily inspection of truck prior to departure and arrival</li><li>Manually break down freight and receive into computer system.</li><li>Put away product utilizing powered industrial equipment.</li><li>Perform tasks in a safe manner and comply with company policies and procedures.</li><li>Proactively identify and report workplace hazards.</li><li>Assist with warehouse activities when a delivery route is not scheduled.</li></ul><h4>Ideal Candidate Will Possess the Following Skills and Abilities</h4><ul><li>Ability to lift and carry up to 50 lbs.</li><li>Ability to sit, stand, walk, climb, kneel, reach, squat and bend during an assigned shift.</li><li>Clean driving history</li><li>Pass DOT Medical and Physical Examination and other clearances</li><li>Excellent Customer Service and communication skills</li><li>Safety oriented</li><li>Able to follow predetermined routing/directions</li><li>Works well in a team environment and with minimal supervision</li></ul>Work Location: Paterson, NJ&nbsp;Compensation: $23/hrPlease visit our careers page today to upload your resume and apply online!EOE/M/F/Veterans/Disability

Singer Equipment Co

Singer Equipment

Driver - Non-CDL

Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking a&nbsp;Maintenance Repair A&nbsp;to join our&nbsp;Howmet Alloy plant in Dover, New Jersey. The work hours for this Weekend Nights Shift&nbsp;are Friday, Saturday, Sunday Night &nbsp;6PM-630AM. Training will occur on Day Shift Monday - Friday 6:00A - 2:30P New Hire Starting Hourly Rate:&nbsp;$34.75; After 12 Months:&nbsp;$37.42 Position will receive an hourly "shift premium" while assigned to an off-shift. $2500 Sign on Bonus payable after 90 days of employment&nbsp;(Sign on Bonus for external candidates&nbsp;only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. Position Overview&nbsp; Makes repairs and does preventative maintenance on facility and manufacturing equipment. Essential Job Functions • &nbsp;Assists Senior Maintenance in maintaining plant mechanical and building equipment. • &nbsp;Installs piping and mechanical equipment as directed. • &nbsp;Able to trouble shoot and repair all routine mechanical failures or malfunctions and acquire some knowledge of hydraulic and pneumatic systems. • &nbsp;Assists in construction and/or repair of all plant equipment. • &nbsp;Keeps records as required. • &nbsp;Must be able to perform the duties of a B Maintenance Mechanic • &nbsp;Performs other duties as assigned by supervision. • &nbsp;Maintain all assigned work areas in as clean, orderly and safe condition as circumstances permit. EHS Requirements • &nbsp;Expected to assist in the implementation of EHS Values and policy statements and accompanying principals. • &nbsp;Comply with all department, facility, corporate and regulatory EHS regulations. • &nbsp;Wear all required personal protective equipment (PPE). • &nbsp;Report all job-related illness and injuries (Per Employee Handbook). • &nbsp;Report all safety, health and environmental concerns to your supervisor in a timely manner. • &nbsp;Attend all EHS training. BASIC QUALIFICATIONS <ul><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.</li><li>High School Diploma or GED from an accredited institution.</li><li>Requires 4 years of work experience in a Manufacturing Environment in a mechanical role&nbsp;or related experience.</li></ul> PREFERRED QUALIFICATIONS <ul><li>Ability to communicate effectively (verbal and written)</li><li>Must be able to work flexible hours including night and weekends with little advanced notice.</li><li>Working towards acquiring a boiler operation license. Will be required to have a boiler license after 1 year of employment</li></ul> Other Skills/Abilities <ul><li>Familiar in repairs and location of plant air compressors, natural gas and propane systems, sprinkler valves, etc., water systems (city, well and tower boilers)</li></ul> Physical Demands <ul><li>Frequent lifting, pushing pulling and standing in a manufacturing environment</li><li>Requires the use of a face shield and respirator at times</li><li>TOOLS - Lathe, Welder, Miller, Grinders, Small hand tools and safety equipment, Computers, Vacuum leak detector</li></ul> Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Howmet Aerospace

Maintenance Mechanic A - Weekend Nights Shift (Alloy)

Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking a&nbsp;Maintenance Repair A&nbsp;to join our&nbsp;Howmet Alloy plant in Dover, New Jersey. The work hours for this Afternoon Shift are Monday - Friday 2:00p - 10:30p. Training will occur on Day Shift Monday - Friday 6:00A - 2:30P New Hire Starting Hourly Rate:&nbsp;$34.75; After 12 Months:&nbsp;$37.42 Position will receive an hourly "shift premium" while assigned to an off-shift. $2500 Sign on Bonus payable after 90 days of employment&nbsp;(Sign on Bonus for external candidates&nbsp;only) Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. Position Overview&nbsp; Makes repairs and does preventative maintenance on facility and manufacturing equipment. Essential Job Functions • &nbsp;Assists Senior Maintenance in maintaining plant mechanical and building equipment. • &nbsp;Installs piping and mechanical equipment as directed. • &nbsp;Able to trouble shoot and repair all routine mechanical failures or malfunctions and acquire some knowledge of hydraulic and pneumatic systems. • &nbsp;Assists in construction and/or repair of all plant equipment. • &nbsp;Keeps records as required. • &nbsp;Must be able to perform the duties of a B Maintenance Mechanic • &nbsp;Performs other duties as assigned by supervision. • &nbsp;Maintain all assigned work areas in as clean, orderly and safe condition as circumstances permit. EHS Requirements • &nbsp;Expected to assist in the implementation of EHS Values and policy statements and accompanying principals. • &nbsp;Comply with all department, facility, corporate and regulatory EHS regulations. • &nbsp;Wear all required personal protective equipment (PPE). • &nbsp;Report all job-related illness and injuries (Per Employee Handbook). • &nbsp;Report all safety, health and environmental concerns to your supervisor in a timely manner. • &nbsp;Attend all EHS training. BASIC QUALIFICATIONS <ul><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>No relocation benefit is offered for this position. Candidates residing within 50 miles radius of Dover, NJ will only be considered.</li><li>High School Diploma or GED from an accredited institution.</li><li>Requires 4 years of work experience in a Manufacturing Environment in a mechanical role&nbsp;or related experience.</li></ul> PREFERRED QUALIFICATIONS <ul><li>Ability to communicate effectively (verbal and written)</li><li>Must be able to work flexible hours including night and weekends with little advanced notice.</li><li>Working towards acquiring a boiler operation license. Will be required to have a boiler license after 1 year of employment</li></ul> Other Skills/Abilities <ul><li>Familiar in repairs and location of plant air compressors, natural gas and propane systems, sprinkler valves, etc., water systems (city, well and tower boilers)</li></ul> Physical Demands <ul><li>Frequent lifting, pushing pulling and standing in a manufacturing environment</li><li>Requires the use of a face shield and respirator at times</li><li>TOOLS - Lathe, Welder, Miller, Grinders, Small hand tools and safety equipment, Computers, Vacuum leak detector</li></ul> Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Maintenance Mechanic A - 2nd Shift (Alloy)

Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks and forgings. We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines and cleaner power generation. Howmet Dover Casting is a world-class supplier of complex, investment-cast turbine airfoils and other components for the aircraft engine and industrial gas turbine industries. Howmet Dover Alloy is a world-class supplier of vacuum and air-melted nickel- and cobalt-based superalloys to aerospace, gas turbine, medical and other high-technology industrial markets. Howmet Aerospace is currently looking a&nbsp;Casting Technician&nbsp;to join our&nbsp;Dover Casting&nbsp;group in&nbsp;Dover, New Jersey.&nbsp;The work hours for this position will be&nbsp;Weekend Day shift (Saturday - Monday 6a - 6p).&nbsp; Training will be on Day shift (Monday - Friday 6:00A - 2:00P) for several months Anticipated Pay Range: $24 - $25.50 per hour.&nbsp; *Pay rates within this range are determined based on various factors including experience, education, certifications, etc. Along with your pay, our company provides you with a comprehensive package of benefits that is competitive with other leading companies. Some of our benefits include: Paid vacation each year, based on length of service; 13 paid holidays per year; 401(k) Retirement Savings Plan, company may match a percentage of your pre-tax contributions; Employer contribution to your Retirement Savings Plan account each pay period; Medical/Prescription Drug/Dental/Vision benefits offered upon hire; Employee Life Insurance, Employee Assistance Program (EAP), Tuition Assistance Program; Free fitness center membership. POSITION OVERVIEW This position is responsible for pouring the molten metal into the casting molds. ENVIRONMENTAL HEALTH &amp; SAFETY RESPONSIBILITIES <ul><li>Expected to assist in the implementation of Howmet's EHS value and policy statement and its accompanying principles.</li><li>Comply with all department, facility, Corporate and Regulatory EH&amp;S regulations.</li><li>Wear all required personal protective equipment.</li><li>Report all job-related illness and injuries. (Per employee handbook).</li><li>Report all Safety, Health &amp; Environmental concerns to your supervisor in a timely manner.</li><li>Attend all EH&amp;S training.</li></ul> ESEENTIAL JOB FUNCTIONS <ul><li>Melts and pours alloy into refractory molds in accordance with standard operating procedures.</li><li>Operates complex vacuum and air melt equipment.</li><li>Generates written reports and maintains department records.</li><li>Inspects refractory molds prior to casting.</li><li>Trains colleagues.</li><li>Notifies supervision or Engineering of problems with molds, equipment, etc.</li><li>Other duties as assigned by supervisor.</li><li>Must be able to read, write and communicate English.</li><li>Must be able to work with computers.</li></ul> BASIC QUALIFICATIONS <ul><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.&nbsp;</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li><li>No relocation benefit is offered for this position. Candidates residing within a 50 miles radius of Dover NJ will only be considered. </li><li>High School Diploma or GED from an accredited institution.</li></ul> PREFERRED QUALIFICATIONS <ul><li>Must complete Casting Training Program</li><li>The employee is also required to fulfill the requirements of a Mold Handler due to the nature of the job and the variability that it requires</li><li>Is capable of performing mold inspection function</li><li>Able to communicate well with others</li><li>Must be able to perform basic math skills</li></ul> PHYSICAL DEMANDS/EQUIPMENT USED &nbsp; <ul><li>Requires lifting of up to 50 lbs. on an occasional basis (up to 33% of an 8-hour day) from waist/ knuckle to shoulder/ overhead height.</li><li>Any weights over 70 lbs. require the use of assistive devices and/ second person assist, if and when possible.&nbsp;</li><li>Pushing and pulling tasks performed using a 4 wheeled cart, involves weights up to 300 lbs. or more.&nbsp;</li><li>Employee will lift up to 50 lbs. with mold handler tongs, which would be required on the job occasionally.</li><li>Must work in a hot, industrial environment.</li><li>Lifting devices</li><li>Ovens</li><li>Vacuum Casting Units</li></ul> Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> The Howmet engines business produces world-class aerospace engine components, including investment castings, fasteners, rings and forgings. Our vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts enable the next generation of quieter, cleaner and more fuel-efficient aerospace engines. Able to supply more than 90% of structural and rotating aerospace engine components.

Production Worker (Casting Technician - Weekend Day (M) Shift)

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician  PCT  CCHT

Working with Us Challenging. Meaningful. Life-changing. Those aren’t words that are usually associated with a job. But working at Bristol Myers Squibb is anything but usual. Here, uniquely interesting work happens every day, in every department. From optimizing a production line to the latest breakthroughs in cell therapy, this is work that transforms the lives of patients, and the careers of those who do it. You’ll get the chance to grow and thrive through opportunities uncommon in scale and scope, alongside high-achieving teams rich in diversity. Take your career farther than you thought possible.Bristol Myers Squibb recognizes the importance of balance and flexibility in our work environment. We offer a wide variety of competitive benefits, services and programs that provide our employees with the resources to pursue their goals, both at work and in their personal lives. Read more: careers.bms.com/working-with-us.__________________________________________________________________________The following positions will require the employees to work with chemical, radiological, or biological agents that may be hazardous to health if mishandled (including Agents which may potentially affect reproduction or the fetus).&nbsp; Employees will be required to follow all safety procedures and use personal protective clothing/Equipment where specified.&nbsp; Inquires for further information should be directed to the hiring manager.__________________________________________________________________________Permanent Position – Process Engineering Mechanic – 51I – CSOShift: 7 AM - 3:30 PM EST&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Site: New Brunswick, NJBldg #&nbsp;115&nbsp;(excluded)Rate: $45.00 / hourJOB FUNCTION:<ul><li>Performs preventative maintenance on pharmaceutical process equipment including tablet presses, tablet coaters, roller compactors, fluid bed processors, blenders, mills, and encapsulation machines.Continuous manufacturing experience a plus.</li><li>Diagnose and/or repair mechanical, electrical, pneumatic, hydraulic, and/or PLC issues to minimize manufacturing downtime.</li><li>Consult and coordinate with equipment vendors as necessary to complete maintenance activities, order parts, and optimize performance.</li><li>Perform work with strict compliance to all BMS operating and safety SOPs, cGMPs, Good Documentation Practices, and OSHA regulations.</li><li>Assists in the development of detailed job plans for PM work and equipment assembly, operation, and cleaning SOPs.</li><li>Provides feedback to management and recommends improvements to optimize performance, increase safety, and compliance with procedures/regulations.</li><li>Assists Facility Maintenance with upkeep of the OSD manufacturing facility.</li><li>Utilize the Computerized Maintenance Management System (Maximo) and other computer programs to complete job tasks.</li><li>May assist manufacturing personnel with equipment operation during production as required.</li><li>Must be able to meet the requirements for respirator and/or appropriate use certification as working condition around potent compounds may occur.</li><li>Must be mechanical and electrically inclined with ability to read equipment drawings, electrical schematics, and P&amp;IDs.</li><li>Contributes to and supports an environment that fosters diversity, inclusion, engagement, and open communication.</li><li>Performs other functions as required or assigned.</li></ul>EDUCATION REQUIREMENTS:<ul><li>High School diploma or equivalent. </li><li>2-year associate’s degree and/or successful completion of a vocational-tech program directly related to Industrial Maintenance from an accredited technical school/college is preferred. </li><li>5 years of experience in a cGMP pharmaceutical manufacturing/technical environment or substantial familiarity of pharmaceutical manufacturing equipment in a cGMP solid dose environment.</li><li>Current, valid driver’s license. </li><li>Must have basic computer skills (e.g. Microsoft Office, email, internet) </li><li>Knowledge of a Computerized Maintenance Management System (CMMS), i.e.: Maximo is preferred. </li><li>Demonstrated ability to effectively troubleshoot, plan work and anticipate potential problems and take appropriate actions. </li><li>Demonstrated ability to remove defective parts by dismantling equipment, using hoists, cranes, and hand and power tools. </li><li>Demonstrated ability to determine changes in dimensional requirements of parts by inspecting used parts, using rules, calipers, micrometers, and other measuring instruments. </li></ul>WORKING CONDITIONS: The position will require the employee to work in areas where chemical, radiological and biological agents that may be hazardous to health if mishandled (including agents which may potentially affect development of the fetus). Assignments may be executed in all NBR R&amp;D Manufacturing facilities interchangeably. Disagreeable conditions including odors, heat, cold, noise, etc. may be experienced. In addition, candidates: <ul><li>Ability to work overtime when warranted. </li><li>Must be willing and able to wear all required PPE (personal protective equipment) including protective garments and respirators. </li><li>Must be willing and able to work at elevated heights (e.g. elevated walkways, grating, platforms, ladders, scaffolding, etc.) and within confined spaces where applicable. </li><li>Ability to perform physically demanding tasks repetitively for extended periods of time (i.e. lifting (up to 35 pounds), walking, climbing, stooping, standing, pushing and/or pulling) with or without reasonable accommodation.</li></ul>_____________________________________________________________________________If you come across a role that intrigues you but doesn’t perfectly line up with your resume, we encourage you to apply anyway. You could be one step away from work that will transform your life and career.Uniquely Interesting Work, Life-changing Careers With a single vision as inspiring as “Transforming patients’ lives through science™ ”, every BMS employee plays an integral role in work that goes far beyond ordinary. Each of us is empowered to apply our individual talents and unique perspectives in an inclusive culture, promoting diversity in clinical trials, while our shared values of passion, innovation, urgency, accountability, inclusion and integrity bring out the highest potential of each of our colleagues.On-site ProtocolBMS has a diverse occupancy structure that determines where an employee is required to conduct their work. This structure includes site-essential, site-by-design, field-based and remote-by-design jobs. The occupancy type that you are assigned is determined by the nature and responsibilities of your role:Site-essential roles require 100% of shifts onsite at your assigned facility. Site-by-design roles may be eligible for a hybrid work model with at least 50% onsite at your assigned facility. For these roles, onsite presence is considered an essential job function and is critical to collaboration, innovation, productivity, and a positive Company culture. For field-based and remote-by-design roles the ability to physically travel to visit customers, patients or business partners and to attend meetings on behalf of BMS as directed is an essential job function.BMS is dedicated to ensuring that people with disabilities can excel through a transparent recruitment process, reasonable workplace accommodations/adjustments and ongoing support in their roles. Applicants can request a reasonable workplace accommodation/adjustment prior to accepting a job offer. If you require reasonable accommodations/adjustments in completing this application, or in any part of the recruitment process, direct your inquiries to <a href="mailto:adastaffingsupport@bms.com" target="_blank">adastaffingsupport@bms.com</a>. Visit careers.bms.com/eeo-accessibility to access our complete Equal Employment Opportunity statement.BMS cares about your well-being and the well-being of our staff, customers, patients, and communities. As a result, the Company strongly recommends that all employees be fully vaccinated for Covid-19 and keep up to date with Covid-19 boosters.BMS will consider for employment qualified applicants with arrest and conviction records, pursuant to applicable laws in your area.If you live in or expect to work from Los Angeles County if hired for this position, please visit this page for important additional information:&nbsp;<a href="https://careers.bms.com/california-residents/" target="_blank">https://careers.bms.com/california-residents/</a>Any data processed in connection with role applications will be treated in accordance with applicable data privacy policies and regulations.

27 Technician Jobs in New Jersey