field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

Company Description About Veolia North America A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>. Job Description BENEFITS Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Position Purpose: Responsible to implement the efficient and correct operation of mechanical, instrumentation and systems-based equipment to achieve the quality performance and safety standards of the company. Primary Duties/Responsibilities: <ul><li>Analyze faults, rectify and ensure correct operation of electrical, mechanical, instrumentation and systems-based equipment, thereby optimizing the performance of process dependent plant.</li><li>Organize, supervise, perform and implement planned maintenance on the plant to ensure required levels of service are achieved.</li><li>Direct the day-to-day activities of mechanics, maintenance craftsmen and electricians to provide effective service and time utilization.</li><li>Direct and supervise contractors and ensure compliance with company and statutory standards.</li><li>Ensure sufficient training of mechanics, maintenance craftsmen, and electricians in electrical, mechanical and /or instrumentation skills to carry out their operational duties.</li><li>Provide accurate and complete plant performance and repair information / logs for entry into computerized maintenance system.</li><li>Analyze and recommend solutions to reoccurring maintenance problems therefore ensuring that the treatment processes are operated with optimized efficiency.</li><li>Ensure senior and plant operators, mechanics, craftsmen and electricians comply with Health and Safety regulations and internal company policies.</li><li>Constantly move about job site and facility to access indoor and outdoor equipment.</li><li>Constantly operate tools, motorized equipment such as pumps and engines as well as computer and other office productivity machinery.</li><li>Occasionally ascends/descends a ladder to service equipment at the facility.</li><li>Very often positions self to maintain equipment including positions such as crawling, stooping, bending and kneeling.</li><li>Constantly communicates with other employees and supervisors about the maintenance of the facility and equipment.</li><li>Must be able to recognize problems and access the seriousness of the situation to take corrective action. Must observe and inspect the condition of equipment to prevent serious malfunctions.</li></ul> Work Environment: <ul><li>While performing duties the employee will be expected to work in outside weather conditions.</li><li>In the working environment there will be automatically starting mechanical and electrical with the associated risks. </li><li>Odors and airborne particles are generated in the wastewater treatment process. </li><li>Dangerous atmospheres can be encountered, and company / regulatory precautions must be used in appropriate circumstances.</li><li>There is a requirement to wear appropriate safety equipment:<ul><li>Safety shoes.</li><li>High visibility tunic outside plant buildings.</li><li>Protective clothing.</li></ul></li><li>In designated areas:<ul><li>Safety hat.</li><li>Eye protection.</li><li>Ear protection.</li></ul></li></ul> Qualifications Education/Experience/Background: <ul><li>High School Diploma/GED is required.</li><li>Advanced Level - 5 to 10 years relevant experience, technical training or a combination of experience and education adequate to assure the required competencies.</li></ul> Knowledge/Skills/Abilities: <ul><li>Familiarity and adherence to all environmental and safety compliance regulations.</li><li>Demonstrate the technical skills and competency in the maintenance of wastewater treatment assets to perform all essential duties.</li><li>Language Skills - Ability to read and interpret documents such as safety rules operating and maintenance instructions and procedure manuals. Ability to write reports and correspondence. Ability to read and comprehend instructions and memos. Ability to communicate information to senior management both orally and/ or in writing. Ability to provide instructions to staff under his/her supervision. Ability to provide and enter computer data onto systems.</li><li>Mathematical Skills- Ability to add, subtract, multiply and divide all units of measure using whole numbers, common fractions and decimals. Ability to calculate and interpret mathematical data. Ability to enter data onto computer systems and interpret results. Ability to apply results of mathematical calculations to required situations.</li><li>Reasoning Ability- Ability to understand interpret and carry out instructions and information. Ability to communicate effectively such information to members of the team. Ability to interpret and act on information provided.</li><li>Practical Skills- Use tools and equipment in the correct fashion. Communicate safe and correct use of tools to others.</li><li>Team leadership and supervisory skills will be essential requirements of the role.</li><li>Carry out an efficient maintenance and repair service to ensure optimal availability of key process dependent plant.</li><li>Supervise the maintenance fault analysis recertification and testing of electrical instrumentation and systems-based equipment.</li><li>Work as a team to keep process operational.</li><li>Assign and direct the duties of mechanics, craftsmen, electricians etc.</li><li>Perform planned preventative maintenance of equipment.</li><li>Supervise to ensure compliance with health and safety procedures.</li><li>The Chief Mechanic will be required to comply with all Health and Safety procedures and to ensure the team under his/her supervision also complies with these procedures. Needs a comprehensive knowledge and understanding of the treatment processes and the maintenance required for mechanical and electrical equipment that is necessary to maintain compliance with the treatment objectives of the facility.</li><li>Full knowledge of safety practices used in the operation and maintenance of mechanical and electrical equipment and in the general performance of all duties.</li><li>Ability to direct and oversee the operation of equipment for maintenance purposes in the wastewater treatment facility.</li><li>Ability to supervise maintenance, fault analysis, rectification and testing of electrical, instrumentation and systems-based equipment.</li><li>Ability to act as Team Leader to plan, guide and carry out necessary maintenance tasks.</li><li>Ability to communicate with management, and team and produce information as required.</li><li>Ability to resolve problems by planning and assessing priorities and directing tasks.</li><li>Decision making skills.</li><li>Sufficient computer skills for data entry and interpretation. Use of computer-based asset maintenance systems to analyze both financial and maintenance data to optimize maintenance resource. Ability to order equipment on a computer-based ordering system in emergencies.</li><li>Must ensure the safe operation and maintenance of all plant and processes.</li><li>Must be reliable and punctual and set a positive example at all times.</li><li>Must be mentally alert at all times.</li><li>Must be a self-starter and self-motivated.</li><li>Job class requires 40 hours per week which may include scheduled weekend duty.</li><li>Incumbents in this position are expected to be on call and will be required to work overtime as needed.</li></ul> Required Certification/Licenses/Training: <ul><li>RI Certification in Water Treatment (1T) or an ability to obtain through testing or reciprocity within 6 months.</li><li>Valid driver's license and CDL License with air brake rider and tanker endorsement required.</li></ul> Physical Requirements: <ul><li>While performing the duties of this job, the employee is regularly required to talk or hear. </li><li>The employee is frequently required to stand; walk; climb stairs or ladders; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and taste or smell. </li><li>The employee may occasionally lift and/or move up to 100 pounds. </li><li>Specific vision abilities required by this job include ability to distinguish color, close vision and distance vision.</li></ul> Additional Information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Chief Maintenance Mechanic

<h4>Company Description</h4>About Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website&nbsp;<a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>.<h4>Job Description</h4>BENEFITS&nbsp;Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.Position Purpose:&nbsp;Provides day-to-day maintenance of collection system. Services pump stations as needed.Primary Duties/Responsibilities:&nbsp;<ul><li>Operates machinery and equipment associated with the operation of a wastewater collection system manually and through instrumentation panels, computer terminals and programmable logic control units following process control procedures.&nbsp; Monitors and observes operating conditions, records observations and data in shift log.&nbsp; Diagnoses basic operational problems and takes corrective action per procedure.</li><li>Performs routine CLAIR (cleaning, lubrication, adjustment, inspection and minor repair) on tools and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed, odor control, disinfection equipment, vacuum filters and belt presses. Reports and documents results of work performed and enters into appropriate database.&nbsp; Promptly reports any operational problems with machines or equipment to Lead or Supervisor.&nbsp;&nbsp; Mechanical lift for manhole covers,</li><li>Inspects field equipment and becomes proficient at mechanical troubleshooting to determine repairs needed.&nbsp; Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices.&nbsp; Re-assembles and tests equipment ensuring safe and efficient operating condition is restored.&nbsp; Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.</li><li>Rehabilitates, repairs and replaces applicable sewer system infrastructure such as manholes, catch basins, sewer lines, etc.&nbsp;</li><li>Performs manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles, mobile equipment and material handling equipment for operational and maintenance purposes.</li><li>May assist in other areas of facility as directed.&nbsp;</li></ul>Work Environment:<ul><li>Spends 100% of the time in operations environment.</li><li>Typically spends 75% of time exposed to outdoor and sometimes inclement weather.</li><li>Company service vehicles are used as required.</li><li>Travels 1 – 2 times per year for company provided training.</li><li>May be required to travel up to five consecutive days.&nbsp;</li><li>May serve rotational 24-hour emergency on-call.</li><li>Possible Work Hazards:&nbsp;May be exposed to possible operations hazards including traffic, fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul><h4>Qualifications</h4>Education/Experience/Background:&nbsp;<ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and the ability to interpret and record data.</li><li>Ability to perform basic mathematical calculations.</li><li>At least two years of experience in a related position with experience in a similar environment preferred, with working knowledge of the standard practices, common tools, materials, and occupational hazards and safety precautions of the trade.</li><li>Experience using material handling equipment, pressure gauges and precision measuring instruments.</li><li>Experience safely using trade tools and equipment to inspect, maintain, troubleshoot or install mechanical, electromechanical, pneumatic and hydraulic equipment.</li></ul>Knowledge/Skills/Abilities:&nbsp;<ul><li>Must be able to carry out verbal and written instructions.</li><li>Must have the ability to diagnose basic and routine process and mechanical problems and take remedial corrective action.&nbsp;</li><li>Must have basic computer skills and have ability to operate programs for process control, the Computer Maintenance Management System.</li><li>Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li><li>Must be able to serve rotational 24-hour emergency on-call if required by site.</li></ul>Required Certification/Licenses/Training:&nbsp;<ul><li>Minimum collection system operator certification as required by regulatory agency at site.</li><li>Must possess a valid CDL driver’s license and a safe driving record.</li></ul>Physical Requirements: <ul><li>Amount of time spent – Sitting 10%, Bending 10%, Standing 10%, and Walking 70% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.&nbsp;</li><li>Works in various positions; may work on ladders, catwalks, and supports at heights of 50 feet above the ground.&nbsp;</li><li>Works with hands extended in front of body up to 40 minutes using hand tools weighing up to 15 pounds.&nbsp;</li><li>Must be able to lift and carry 60 pounds, in standing and bending positions, distances of 10 feet.&nbsp;</li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul><h4>Additional Information</h4>We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Wastewater Collections O&M Technician

<h4>Company Description</h4>About Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website&nbsp;<a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>.<h4>Job Description</h4>BENEFITS&nbsp;Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.Position Purpose:&nbsp;Maintains all treatment equipment necessary to produce quality potable water.Primary Duties/Responsibilities:&nbsp;<ul><li>Also necessary are knowledge of water treatment procedures and the mechanical equipment necessary for water treatment as well as knowledge of electricity, electrical circuitry and industrial electricity and basic electronics.</li><li>The Mechanic maintains the water treatment equipment which involves periodic calibrations in chemical feed equipment, scheduled oil changes and lubrication of mechanical items, alignment checks of rotating equipment, wear and tolerance checks of pump impellers, seals, packing and bearings.</li><li>The incumbent determines the sources of equipment failure and determines the most effective solution to get it back in service as soon as possible. The Mechanic determines if a piece of equipment is worthy or repairs, the extent of the repair to be made and if the repair can be made on site of if the machinery needs factory attention. Due to the aging and obsolete equipment, the incumbent fabricates items no longer available and updates aging equipment to use components that are readily available. In this capacity, he/she deals with hardware and plumbing suppliers, electrical suppliers, machine ships, bearing dealer, electric motor repair and sales, chemical feeder suppliers and oil distributors.</li><li>The Mechanic instructs the Operators in the proper operation of all treatment equipment and the proper way to perform the minor maintenance or adjustments necessary for proper plant maintenance.</li><li>He/she maintains a personal computer database file on every mechanical item at the treatment plant, booster stations, and wells. This database keeps the mechanic aware of service due dates and provides a detailed history of equipment performance.</li><li>This position description is intended for the purpose of Hay evaluation and salary positioning and is not a contract setting forth the full scope of employment. The employer retains the right to deviate from the description at its discretion, without notice.</li><li>Maintains the water treatment equipment by performing periodic calibrations, scheduled oil changes and lubrication, alignment checks, and wear and tolerance checks.</li><li>Determines the sources of equipment failure and decides on the most effective solution to get it back in service as soon as possible.</li><li>Deals with hardware and plumbing suppliers, electrical suppliers, machine ships, bearing dealer, electric motor repair and sales, chemical feeder suppliers and oil distributors.</li><li>Instructs the Operators in the proper operation of all treatment equipment and minor maintenance or adjustments.</li><li>Maintains a personal computer database file on every mechanical item at the treatment plant, booster stations, and wells to keep track of service due dates and have a detailed history of equipment performance.</li></ul><h4>Qualifications</h4>Education/Experience/Background:&nbsp;<ul><li>High School Diploma/GED is required.</li></ul>Knowledge/Skills/Abilities:&nbsp;<ul><li>Knowledge of water treatment procedures and the mechanical equipment necessary for water treatment as well as knowledge of electricity, electrical circuitry and industrial electricity and basic electronics.</li></ul>Required Certification/Licenses/Training:&nbsp;<ul><li>Additional technical training is required.</li></ul><h4>Additional Information</h4>We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Wastewater Mechanic

<h4>Company Description</h4>About Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website&nbsp;<a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>.<h4>Job Description</h4>BENEFITSVeolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.Position Purpose:Inspects, maintains, repairs, and installs electrical systems, instrumentation systems, mechanical, pneumatic, and hydraulic equipment, and fixtures.Primary Duties/Responsibilities:<ul><li>Performs preventive, predictive, and corrective maintenance on mechanical, electromechanical, hydraulic and pneumatic equipment according to vendor specifications.</li><li>Inspects and troubleshoots electrical and instrumentation systems, equipment, and fixtures using testing devices, gauges, and other tools of the trade; obtains necessary parts through established procedures.</li><li>Performs electrically related activities; and installs new or replacement electrical systems, equipment, and fixtures.</li><li>Calibrates instrumentation, valves, flow meters, etc.&nbsp;Zeros and spans, debugs, and adjusts.&nbsp;</li><li>Programs variable frequency drives.&nbsp;Tunes controllers, valves, actuators, etc.</li><li>Downloads and restores stored data in PLCs, controllers, eproms, etc.&nbsp; Pulls up SCADA/PLC control strategies, looks at I/O for errors, diagnoses and resolves communication circuit problems, etc.&nbsp; Changes I/O modules, PLCs, etc.</li><li>Completes tasks and repairs common to their licensed specialty,</li><li>Reports and documents result of inspections and work performed, enters data into computer programs, and prepares labor and material estimates.</li><li>Operates vehicles and mobile equipment for plant maintenance purposes.</li><li>Trains peers and subordinates as requested.</li><li>Assures work is performed in a safe and professional manner by following established safety, operating, and emergency response procedures, and in conformance with relevant building and electrical codes.</li><li>Performs cleanup and housekeeping tasks for work area, tools, and equipment.</li></ul>Work Environment:<ul><li>Requires working in outside and inside environments with noise and all temperatures and climatic conditions and must be able to work under adverse weather conditions for extended periods of time.</li></ul><h4>Qualifications</h4>Education/Experience/Background:<ul><li>High School Diploma/GED is required.</li></ul>Knowledge/Skills/Abilities:<ul><li>Must demonstrate a working ability to use computer programs for maintenance management.</li><li>Requires working knowledge of the standard practices, common tools, materials, occupational hazards, and safety precautions of the trade as acquired through four years of on-the-job electrician/instrumentation experience.</li><li>Requires basic knowledge relating to the maintenance of pumps, blowers, compressors, and other electrically driven equipment.</li><li>Must have the ability to safely operate material handling equipment; and to apply electrical methods to the maintenance of electrical systems, equipment, and fixtures.</li><li>Requires good reading, math, writing, scientific, and verbal communication skills; and the ability to read wiring diagrams, sketches, blueprints, specifications, and vendor instructions.</li><li>Requires the ability to carry out verbal and written instructions.</li><li>Requires ability to plan, organize, train, and functionally supervise subordinates.</li><li>Must have the ability to establish effective working relationships with other employees.</li></ul>Required Certification/Licenses/Training:<ul><li>Must have a valid driver's license.</li><li>Must have an Electrical Journeyman’s License; Other Nationally Recognized Licensed Trades will be considered for the position. Consideration will be based upon the needs of the facility.</li></ul>Physical Requirements:<ul><li>Ability to work in various positions which require bending (60%), walking (25%), standing (10%), and sitting (5%).&nbsp; Requires lying on back, kneeling, crawling, twisting, and squatting.</li><li>Must be able to distinguish green indicator lights from red.</li><li>Body movements require working with hands extended above and below head and from body, using hand tools weighing up to 10 pounds.</li><li>Ability to lift and carry 60 pounds in standing and bending positions and carry while walking distance of 10 feet.</li><li>Ability to work on ladders, catwalks, and supports at heights of 50 feet above the ground.</li></ul><h4>Additional Information</h4>We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Maintenance Technician III

<h4>Company Description</h4>About Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website&nbsp;<a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>.<h4>Job Description</h4>BENEFITS&nbsp;Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.Position Purpose:&nbsp;The Water Treatment Plant Operations Specialist (hereafter referred to as Operator) provides skilled work in the operation and maintenance of the water treatment, pumping and water supply facilities to provide high quality drinking water and to comply with federal and states laws, regulations and in compliance with SUEZ standards.The work involves responsibility for the proper operation of the water treatment plant equipment, instrumentation including calibration, pumps, chemical feed systems, laboratory equipment, and all other pertinent equipment and devices necessary to ensure the compliant operation of the water system.&nbsp; The work is performed in accordance with oral and written instructions and with accepted water industry practices under the supervision of the Project Manager.&nbsp; Operators will fill the role of shift operator and as such are required to exercise a great deal of judgment and skill in the operation of the water treatment plant and supply facilities.The Operator position is scheduled for various shifts to provide 24-hour 7 day per week coverage.&nbsp; Overtime may be required.Operator position requires continuing training, seminars and classes to stay abreast of continuing developments in the Water Treatment field and to maintain certification, as well as mandatory attendance at company sponsored safety and operator development sessions.Primary Duties/Responsibilities: <ul><li>Operate all unit processes within the treatment plant.</li><li>Operates chemical feed equipment, electric and hydraulic motors and any other equipment necessary for the treatment process.</li><li>Uses instrumentation and computer systems to collect and interpret water quality results.</li><li>Operates and maintains SCADA systems.</li><li>Performs minor maintenance to chemical analyzers and feed systems.</li><li>Operates low- and high-pressure pumps, well pumps, motor operated and manually operated valves and other water supply and pumping equipment.</li><li>Operates, monitors and controls engines and generators to provide emergency power during electrical power failures.</li><li>Performs routine maintenance on water treatment and pumping equipment and facilities.</li><li>Performs routine laboratory tests, performs moderately complex mathematical calculations, to determine rates of chemical addition and relate adjustments for process control, for treatment process.&nbsp; Examples of tests include chlorine residual, turbidity, particle size, Fluoride, conductivity, pH and temperature and coagulant doses.</li><li>Performs general housekeeping duties to maintain a clean, sanitary and professional appearance of the treatment and system supply facilities including buildings and grounds.</li><li>Receives, tests and unloads bulk chemical deliveries including stacking, mixing chemical solutions, adds chemicals to feed equipment and maintains proper chemical feed rates to ensure plant performance.</li><li>Inspects and regulates the flow of water through the treatment process and pumping facilities in accordance with changing rates of usage, changing quality of the water, and established policies and procedures.</li><li>Makes periodic rounds through and around the treatment and pumping facilities to inspect equipment and to check and record readings from various charts, meters, gauges and indicators.</li><li>Maintains logs and records of charts, meter and gauge readings, chemical feed settings, laboratory test results, plant operation, and other activities and data; prepares summary reports of operations.</li><li>Enters data into computerized spread sheets.</li><li>Answers incoming phone calls.</li><li>Performs other related duties as directed.</li></ul>Work Environment:<ul><li>Including but not limited to: fumes or air borne particles, toxic or caustic chemicals, risk of electrical shock, outdoor weather conditions, wet or humid conditions and moving mechanical parts.</li></ul><h4>Qualifications</h4>Education/Experience/Background:&nbsp;<ul><li>High School Diploma/GED is required.</li><li>A college education is desired and may be required for proper Operator Certification.</li></ul>Knowledge/Skills/Abilities:&nbsp;<ul><li>To perform this job successfully, an individual must be able to perform each essential duty satisfactory according to implemented standard operating procedures. The requirements listed below are representative of the knowledge, skill, and or ability required.</li><li>The Water Treatment Operator requires knowledge of the principles, practices, methods and safety requirements used in water treatment and pumping operations; knowledge and skill in the operation of mechanical and electrical equipment and instrumentation used in modern water treatment and pumping facilities; and knowledge of the functions and maintenance requirements of water filtration, treatment and pumping equipment.</li><li>The Water Treatment Operator requires the ability to take accurate readings to perform moderately complex laboratory tests, to make complex mathematical calculations, to keep accurate records, and to perform routine clerical duties.&nbsp; The Operator requires the ability to understand and follow moderately complex oral and written instructions.&nbsp;</li><li>The Operator must have the ability to read, understand and execute written and oral instructions in the English language.</li><li>The Water Treatment Operator requires the ability to make independent, responsible decisions in response to changing operating conditions and emergencies.</li></ul>Required Certification/Licenses/Training:&nbsp;<ul><li>Requires valid and current Water Treatment Plant Operator grade II certification as issued by the State of Rhode Island upon date of hire or a transferable license from another State that is acceptable to the RI certification board.</li><li>Valid and current Water Treatment Plant Operator Grade III preferred.</li><li>The Water Treatment Plant Operator requires possession of a valid driver’s license.</li></ul><h4>Additional Information</h4>We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

O&M Technician

<h4>Company Description</h4>About Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website&nbsp;<a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>.<h4>Job Description</h4>BENEFITSVeolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.Position Purpose:Performs maintenance services, installation or repairs in one or more skill areas such as plumbing, mechanical, electrical repairs, pneumatic, hydraulic, installation, carpentry, painting or vehicle servicing.Primary Duties/Responsibilities:<ul><li>Performs routine and preventative maintenance, lubrication and minor adjustments on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed and odor control, disinfection equipment, vacuum filters and belt presses. Promptly reports any operational problems with machines or equipment to Lead or Supervisor.</li><li>Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices. Re-assembles and tests equipment&nbsp;ensuring safe and efficient operating conditions are restored. Learns to troubleshoot hydraulic, pneumatic and electronic equipment and instrumentation.</li><li>Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and/or paint.</li><li>May perform manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies. Operates vehicles for plant operational purposes.</li><li>Learns to estimate time and material costs for various projects. May assist in other areas of plant as directed.</li></ul>Work Environment:<ul><li>Spends 100% of the time in the operations environment. Typically spends 25 – 35% of time exposed to outdoor and sometimes inclement weather. Company service vehicles are used as required.</li><li>Travels 1 – 2 times per year for company provided training. May serve rotational 24 hour emergency on-call.</li><li>Possible Work Hazards: May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water and electrical hazards.</li></ul><h4>Qualifications</h4>Education/Experience/Background:<ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety and quality instructions) and be able to carry out verbal and written instructions.</li><li>Six months to two years experience in a related position with ability to comprehend specifications, blueprints and manuals.</li></ul>Knowledge/Skills/Abilities:<ul><li>Ability to perform basic mathematical calculations.</li><li>Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Experience using power, pneumatic, hydraulic, and hand tools and shop tools such as drill press, band saw, bench grinder, and torque wrench preferred.</li><li>Experience using material handling equipment, pressure gauges and precision measuring instruments.</li><li>Must have ability to operate Computer Maintenance Management System (software).</li><li>Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li></ul>Required Certification/Licenses/Training:<ul><li>Must have a valid driver's license.</li><li>Minimum water / wastewater license as required by regulatory agency at site.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, Confined Space training, OSHA and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site. Minimum water / wastewater operator state certification.</li><li>Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)</li><li>Forklift Certification if required by site.</li><li>Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics and control systems.</li><li>Obtain or maintain HVAC, Electrician, Plumber’s or other trade License if assigned to that area. Note: Tech will not perform duties unless properly licensed.</li><li>Training in the use of energy management systems as needed.</li><li>Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications.</li></ul>Physical Requirements:<ul><li>Amount of time spent – Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.</li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds.</li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet.</li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul><h4>Additional Information</h4>We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Maintenance Technician I

<h4>Company Description</h4>About Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website&nbsp;<a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>.<h4>Job Description</h4>BENEFITSVeolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement.&nbsp; Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.&nbsp;Position Purpose:&nbsp;Consistently leads an assigned team to inspect, maintain, repair, and install mechanical, electromechanical, pneumatic and/or hydraulic equipment at plant and/or pump stations.Primary Duties/Responsibilities:<ul><li>In conjunction with supervisor, or in his/her absence, reviews daily team requirements.&nbsp; Oversees work assignments to ensure that schedules are met.&nbsp; May recommend changes to schedule to optimize production and/or reduce costs.&nbsp; Ensures that labor reporting is accurate and balances with labor tracking system.&nbsp; Provides feedback to Supervisor on labor, material and equipment demands needed to achieve schedule.&nbsp;</li><li>Monitors work assignments and ensures that team members are meeting or exceeding production and quality standards.&nbsp; Coaches and trains team members to increase skill level and to improve productivity, safety, quality, and processes in a cost-effective manner.&nbsp; Trains team members to troubleshoot and resolve problems.</li><li>Provides technical guidance, troubleshoots, resolves, or coordinates resolution of technical issues/problems on a proactive basis.&nbsp; Models and teaches finding cost effective solutions to tasks.</li><li>Prepares work orders either manually or from a Computer Maintenance Management System as required and prepares work related reports, procurement requisitions, charts, graphs, and data submittal requirements in an accurate and timely manner.&nbsp;</li><li>Models safe work practices and provides leadership in achieving safety goals.&nbsp; May assist with safety training.&nbsp; Ensures that safety awareness is ongoing, that good housekeeping is practiced and that environmental and safety regulatory requirements are met.&nbsp; Reports potential problems to supervisor on a timely basis.</li><li>Performs duties of Maintenance Tech as required.</li></ul>SPECIFIC ACTIVITIES (INTERMITTENT, ON AN OCCASIONAL BASIS, ETC.):<ul><li>May assist with maintaining parts, spares and maintenance procurement and inventory.</li><li>May assist in other areas of plant as directed.</li></ul>Work Environment:<ul><li>Spends 100% of the time in operations environment.</li><li>Typically spends 25 – 35% of time exposed to outdoor and sometimes inclement weather</li><li>Company service vehicles are used as required.</li><li>Travels 1 – 2 times per year for company provided training.</li><li>May serve rotational 24-hour emergency on-call.</li><li>Possible Work Hazards:&nbsp;May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water, and electrical hazards.</li></ul><h4>Qualifications</h4>Education/Experience/Background:<ul><li>High school or GED with the ability to read, write and comprehend English (operational, process, safety, and quality instructions) and be able to carry out verbal and written instructions.</li><li>Over five years of experience in a related position in a similar environment with ability to comprehend complex specifications, blueprints, and manuals.</li></ul>Knowledge/Skills/Abilities:<ul><li>Ability to perform basic mathematical calculations.&nbsp; Vocational training and mechanical aptitude required, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.</li><li>Demonstrates ability to mentor, coach, and train others to identify cost effective solutions.</li><li>Must demonstrate ability to use computer programs for preparing work orders, work related reports, charts, graphs, and data submittal requirements.</li><li>Must demonstrate proficiency in and model the care and use of all site specific, facility required PPE (Personal Protection Equipment).</li><li>Must consistently demonstrate the ability to perform all assigned tasks in an organized, accurate and timely manner and the ability to efficiently maintain, install and repair any equipment used in the facility.&nbsp; Fabrication and welding experience may be required if necessary, at site.</li><li>Must have the ability to diagnose problems regardless of complexity, troubleshoot mechanical, electro-mechanical, hydraulic, or pneumatic equipment and take corrective action within policy and procedure limitations.</li><li>Good verbal and written communication skills are necessary.</li><li>Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.</li></ul>Required Certification/Licenses/Training:<ul><li>Minimum water/wastewater license as required by regulatory agencies at site.</li><li>Must possess a valid driver’s license (commercial license and heavy equipment operator license is desirable) and a safe driving record.</li><li>Employee Orientation, Departmental Operating Procedures, Safety, OSHA, and Quality Training.</li><li>HAZWOPER (Hazardous Waste Operations and Emergency Response)</li><li>Obtain or maintain HVAC, Electrician, Plumber’s, or other trade License if assigned to that area. Note:&nbsp; Will not perform duties unless properly licensed.</li><li>Forklift Certification if required by site.</li><li>May perform more advanced functions as part of training and development.</li></ul>Physical Requirements:<ul><li>Must be able to serve rotational 24-hour emergency on-call if required by site.</li><li>Amount of time spent – Standing 25%, Walking 75% for as many as five miles per shift.</li><li>Requires close visual and hearing observation to detect non-conformance and machine malfunction.</li><li>Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.&nbsp;</li><li>Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds.</li><li>Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet.</li><li>Occasional stooping, bending or kneeling and entering confined spaces.</li></ul><h4>Additional Information</h4>We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Wastewater Mechanic Lead

<h4>Company Description</h4>About Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website&nbsp;<a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a>.<h4>Job Description</h4>BENEFITS&nbsp;Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.Position Purpose:&nbsp;Responsible to implement the efficient and correct operation of mechanical, instrumentation and systems-based equipment to achieve the quality performance and safety standards of the company.Primary Duties/Responsibilities: <ul><li>Analyze faults, rectify and ensure correct operation of electrical, mechanical, instrumentation and systems-based equipment, thereby optimizing the performance of process dependent plant.</li><li>Organize, supervise, perform and implement planned maintenance on the plant to ensure required levels of service are achieved.</li><li>Direct the day-to-day activities of mechanics, maintenance craftsmen and electricians to provide effective service and time utilization.</li><li>Direct and supervise contractors and ensure compliance with company and statutory standards.</li><li>Ensure sufficient training of mechanics, maintenance craftsmen, and electricians in electrical, mechanical and /or instrumentation skills to carry out their operational duties.</li><li>Provide accurate and complete plant performance and repair information / logs for entry into computerized maintenance system.</li><li>Analyze and recommend solutions to reoccurring maintenance problems therefore ensuring that the treatment processes are operated with optimized efficiency.</li><li>Ensure senior and plant operators, mechanics, craftsmen and electricians comply with Health and Safety regulations and internal company policies.</li><li>Constantly move about job site and facility to access indoor and outdoor equipment.</li><li>Constantly operate tools, motorized equipment such as pumps and engines as well as computer and other office productivity machinery.</li><li>Occasionally ascends/descends a ladder to service equipment at the facility.</li><li>Very often positions self to maintain equipment including positions such as crawling, stooping, bending and kneeling.</li><li>Constantly communicates with other employees and supervisors about the maintenance of the facility and equipment.</li><li>Must be able to recognize problems and access the seriousness of the situation to take corrective action. Must observe and inspect the condition of equipment to prevent serious malfunctions.</li></ul>Work Environment:<ul><li>While performing duties the employee will be expected to work in outside weather conditions.</li><li>In the working environment there will be automatically starting mechanical and electrical with the associated risks.&nbsp;</li><li>Odors and airborne particles are generated in the wastewater treatment process.&nbsp;</li><li>Dangerous atmospheres can be encountered, and company / regulatory precautions must be used in appropriate circumstances.</li><li>There is a requirement to wear appropriate safety equipment:<ul><li>Safety shoes.</li><li>High visibility tunic outside plant buildings.</li><li>Protective clothing.</li></ul></li><li>In designated areas:<ul><li>Safety hat.</li><li>Eye protection.</li><li>Ear protection.</li></ul></li></ul><h4>Qualifications</h4>Education/Experience/Background:&nbsp;<ul><li>High School Diploma/GED is required.</li><li>Advanced Level – 5 to 10 years relevant experience, technical training or a combination of experience and education adequate to assure the required competencies.</li></ul>Knowledge/Skills/Abilities:&nbsp;<ul><li>Familiarity and adherence to all environmental and safety compliance regulations.</li><li>Demonstrate the technical skills and competency in the maintenance of wastewater treatment assets to perform all essential duties.</li><li>Language Skills - Ability to read and interpret documents such as safety rules operating and maintenance instructions and procedure manuals. Ability to write reports and correspondence. Ability to read and comprehend instructions and memos. Ability to communicate information to senior management both orally and/ or in writing. Ability to provide instructions to staff under his/her supervision.&nbsp;Ability to provide and enter computer data onto systems.</li><li>Mathematical Skills- Ability to add, subtract, multiply and divide all units of measure using whole numbers, common fractions and decimals.&nbsp; Ability to calculate and interpret mathematical data. Ability to enter data onto computer systems and interpret results. Ability to apply results of mathematical calculations to required situations.</li><li>Reasoning Ability- Ability to understand interpret and carry out instructions and information.&nbsp; Ability to communicate effectively such information to members of the team. Ability to interpret and act on information provided.</li><li>Practical Skills- Use tools and equipment in the correct fashion. Communicate safe and correct use of tools to others.</li><li>Team leadership and supervisory skills will be essential requirements of the role.</li><li>Carry out an efficient maintenance and repair service to ensure optimal availability of key process dependent plant.</li><li>Supervise the maintenance fault analysis recertification and testing of electrical instrumentation and systems-based equipment.</li><li>Work as a team to keep process operational.</li><li>Assign and direct the duties of mechanics, craftsmen, electricians etc.</li><li>Perform planned preventative maintenance of equipment.</li><li>Supervise to ensure compliance with health and safety procedures.</li><li>The Chief Mechanic will be required to comply with all Health and Safety procedures and to ensure the team under his/her supervision also complies with these procedures.&nbsp;Needs a comprehensive knowledge and understanding of the treatment processes and the&nbsp;maintenance required for mechanical and electrical equipment that is necessary to maintain compliance with the treatment objectives of the facility.</li><li>Full knowledge of safety practices used in the operation and maintenance of mechanical and electrical equipment and in the general performance of all duties.</li><li>Ability to direct and oversee the operation of equipment for maintenance purposes in the wastewater treatment facility.</li><li>Ability to supervise maintenance, fault analysis, rectification and testing of electrical, instrumentation and systems-based equipment.</li><li>Ability to act as Team Leader to plan, guide and carry out necessary maintenance tasks.</li><li>Ability to communicate with management, and team and produce information as required.</li><li>Ability to resolve problems by planning and assessing priorities and directing tasks.</li><li>Decision making skills.</li><li>Sufficient computer skills for data entry and interpretation.&nbsp;Use of computer-based asset maintenance systems to analyze both financial and maintenance data to optimize maintenance resource.&nbsp;Ability to order equipment on a computer-based ordering system in emergencies.</li><li>Must ensure the safe operation and maintenance of all plant and processes.</li><li>Must be reliable and punctual and set a positive example at all times.</li><li>Must be mentally alert at all times.</li><li>Must be a self-starter and self-motivated.</li><li>Job class requires 40 hours per week which may include scheduled weekend duty.</li><li>Incumbents in this position are expected to be on call and will be required to work overtime as needed.</li></ul>Required Certification/Licenses/Training:&nbsp;<ul><li>RI Certification in Water Treatment (1T) or an ability to obtain through testing or reciprocity within 6 months.</li><li>Valid driver’s license and CDL License with air brake rider and tanker endorsement required.</li></ul>Physical Requirements:&nbsp;<ul><li>While performing the duties of this job, the employee is regularly required to talk or hear.&nbsp;</li><li>The employee is frequently required to stand; walk; climb stairs or ladders; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and taste or smell.&nbsp;</li><li>The employee may occasionally lift and/or move up to 100 pounds.&nbsp;</li><li>Specific vision abilities required by this job include ability to distinguish color, close vision and distance vision.</li></ul><h4>Additional Information</h4>We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

8 Technician Jobs in Rhode Island