field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

<dt><h4>Description</h4></dt> The City of Irvine seeks entry-level and journey-level automotive/heavy duty vehicle technicians to fill a vacancy within the Fleet Services division. This position will perform routine scheduled maintenance as well as diagnose and troubleshoot complex mechanical problems and perform major mechanical and electrical repairs to the City's fleet, including transit vehicles and heavy equipment.Your Impact<ul><li>Inspect, maintain and diagnose automobiles, trucks, off-highway equipment, carts, specialty tools, and equipment.</li><li>Maintain a variety of power plants including diesel, gasoline, hybrid, electric, and compressed natural gas.&nbsp;</li><li>Perform routine preventative maintenance such as safety inspections, changing oil and filters, replacing brakes, and patching or replacing tires.</li><li>Complete a variety of highly skilled mechanical repairs and maintenance on heavy vehicles and equipment including excavators, dump trucks, street sweepers, backhoes, and loaders.</li><li>Overhaul, repair, and adjust engines, transmissions, differentials, hydraulic equipment, clutches, drive shafts, and u-joints.&nbsp;</li><li>Fabricate, weld, and modify parts and equipment such as panels, brackets, light stands, equipment boxes, and battery boxes.</li><li>Ability to communicate effectively, orally and in writing, with vendors, City maintenance/repair personnel, City vehicle drivers and City equipment operators.</li><li>Provide exceptional customer sevice.</li><li>Find additional information in the Equipment Mechanic job description.</li></ul>Best Fit<ul><li>Entry-level experience in automotive or heavy-duty vehicle maintenance.</li><li>Demonstrate strong interpersonal communication skills to work with City staff, contracts, vendors, and dealers.</li><li>Mechanic knowledge including engine to electrical, heavy to light-duty vehicles, CNG, and alternative fuel systems.</li><li>Class B commercial driver's license highly desirable.</li></ul>Minimum Qualifications<ul><li>High school diploma or equivalent with vocational/technical training in vehicle and equipment maintenance and repair.</li><li>Three years of vehicle/equipment maintenance and repair experience, or any combination of education and experience that provides equivalent knowledge, skills, and abilities.</li><li>Possession of, or ability to obtain, an appropriate California driver's license.</li></ul>Your TeamThe Mission of the Employees of the City of Irvine is to create and maintain a community where people can live, work, and play in an environment that is safe, vibrant, and aesthetically pleasing. We are one team that exists to serve our community in the continual pursuit of a City that offers an exceptional quality of life. The City of Irvine’s five values of&nbsp;Humility,&nbsp;Innovation,&nbsp;Empathy,&nbsp;Passion, and&nbsp;Integrity&nbsp;reflect the interests and needs of the community, and the level of service they expect and desire.&nbsp;We are&nbsp;One Irvine&nbsp;through embrace of a team-oriented approach by living our values every day. The Public Works &amp; Sustainability Department combines the strengths of Administration &amp; Planning, Park Development, Transportation Planning &amp; Mobility, Infrastructure Maintenance &amp; Operations, Capital Project Delivery, and Sustainability &amp;Environmental Initiatives to create a unified approach to infrastructure management and sustainability. City assets include streetscapes, open space, City parks (community and neighborhood), athletic fields, bike trails, roadways, traffic signals, and more. The Capital Improvement Program has an annual delivery of $100 million in capital projects, in addition to the delivery of the globally relevant Great Park. With over 200 dedicated staff across 5 divisions, we prioritize efficiency, sustainability, and community engagement in all our endeavors. Together, we strive to build and maintain infrastructure that meets the needs of our community while ensuring a sustainable future for generations to come.The ProcessThe selection process will include an oral interview and conduct a background investigation prior to appointment. This recruitment may establish an eligibility list to fill future positions in similar. Equal Opportunity EmployerThe City of Irvine is an Equal Opportunity Employer and provides reasonable accommodations to qualified individuals with disabilities. We encourage you to inform Human Resources at least two business days prior to the first phase of the selection process if you have a disability that may require an accommodation.

City of Irvine

Equipment Mechanic

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRONNeutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!PROPULSION ASSEMBLY TECHNICIAN I/IIBased out of Rocket Lab's Headquarters in Long Beach, CA the Propulsion Assembly Technician is responsible for building sub-assemblies for the Rutherford rocket engine. The engine consists of a thrust chamber, pumps, valves, plumbing, TVC actuators, motor controllers, and other mechanical components. You will support the Propulsion Production Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors.&nbsp;(Please note: this position can be hired at the Propulsion Assembly Technician I or Propulsion Assembly Technician II level)WHAT YOU'LL GET TO DO:<ul><li>Work on a high caliber cross functional team</li><li>Test rocket hardware</li><li>Build turbo pumps and rocket engines.</li><li>Watch the hardware you build make fire and go to space.</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN I:<ul><li>2+ years of mechanical assembly experience in aviation, aerospace, or similar industry</li><li>Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation)</li><li>Talented with electrical assembly tools (i.e.: bench testing and measuring instruments)</li><li>High school diploma or GED.</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN II:<ul><li>5+ years of mechanical assembly experience in aviation, aerospace, or similar industry</li><li>Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation)</li><li>Talented with electrical assembly tools (i.e.: bench testing and measuring instruments)</li><li>High school diploma or GED.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>8+ years of mechanical assembly and/or mechanical fitting experience</li><li>Experience performing; torquing, safety and/or lock wire installation, assembly per work instructions, and environment tests (proof and leak). .</li><li>A&amp;P, trade, or industry certified.</li><li>Experience with in-space mechanical assemblies preferred.</li><li>Knowledgeable in manufacturing processes and continued product development.</li></ul>ADDITIONAL REQUIREMENTS&nbsp;<ul><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position&nbsp;</li><li>Able to lift up to 25lbs. unassisted&nbsp;</li><li>Must be able to climb ladders and be comfortable working in tight spaces.&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min </li><li>Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces &nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$25—$35 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Propulsion Assembly Technician I/II

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $290 billion of real estate in 247 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 857,400 units/beds globally, and has a robust institutional investment management platform comprised of more than $76 billion of assets under management, including over $34 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTIONProperty Type: StabilizedUnit Count: 249Preference: HVAC experience Schedule: Sunday/ Monday Off * Subject to change due to business needsEssential Responsibilities: 1. Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements.&nbsp;2. Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work.&nbsp;3. Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs.&nbsp;4. Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked.&nbsp;5. Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed.&nbsp;6. Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment.&nbsp; &nbsp;Other Responsibilities:&nbsp; 1. Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately.&nbsp;2. May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required.&nbsp;Service Technician&nbsp;3. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management.&nbsp;Required Licenses or Certifications: •&nbsp;&nbsp; &nbsp;Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have valid driver’s license to operate a golf cart on property.#LI-KW1The hourly range for this position is $17.50 to 26.25. (Norwalk, CA)Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.

Greystar

Service Technician - Norwalk Metropointe

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!FACILITIESRocket Lab’s Facilities team is responsible for maintenance, operations, and improvements projects across our locations, making sure that the facilities our teams use every day are well looked after and operating as they should.Senior Equipment Maintenance Technician&nbsp;Based out of Rocket Lab's Headquarters in Long Beach, CA the Sr. Equipment Maintenance Technician is responsible for creation and execution of equipment maintenance tasks across 2 buildings. You will support the Equipment and Facilities Manager and Production organizations, with deliverables required for internal leadership, board of directors, and investors.&nbsp;WHAT YOU’LL GET TO DO: <ul><li>Maintain and repair all critical assets to ensure their proper operating condition&nbsp;</li></ul><ul><li>Create and carry out preventative maintenance requirements for each piece of equipment in RLHQ and EDC (including CNC machines, Inspection equipment, Testing equipment, 3d Printers, Vacuum Pumps, etc.)&nbsp;</li></ul><ul><li>Troubleshoot mechanical, electrical, and HVAC systems down to the component level&nbsp;</li></ul><ul><li>Read and utilize schematics (mechanical/ electrical/pneumatic/hydraulic)&nbsp;</li></ul><ul><li>Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment&nbsp;</li></ul><ul><li>Create and maintain maintenance plans within the approved systems&nbsp;</li></ul>YOU’LL BRING THESE QUALIFICATIONS: <ul><li>High school diploma or equivalency certificate&nbsp;&nbsp;</li></ul><ul><li>8+ years of experience with repairing mechanical, electrical, pneumatic, or hydraulic systems&nbsp;</li></ul><ul><li>Experience in a manufacturing or production environment&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE: <ul><li>Maintenance experience on CNC equipment (Haas, DMG, Mazak, Hermle)&nbsp;</li></ul><ul><li>Maintenance experience on vacuum systems, environmental thermal testing&nbsp;</li></ul><ul><li>Any training certifications are a plus.&nbsp;</li></ul><ul><li>Experience operating a forklift and other related inventory equipment&nbsp;</li></ul><ul><li>Ability to read and interpret electrical, hydraulic and pneumatic schematics and drawings&nbsp;</li></ul><ul><li>Ability to write detailed repair reports (advanced MS Office skills)&nbsp;</li></ul><ul><li>Analytic thinker that gets to the root of the problem and comes up with permanent solution to remedy the issue&nbsp;</li></ul><ul><li>Ability to navigate, utilize, and close out work orders&nbsp;&nbsp;</li></ul><ul><li>Ability to maintain a safe and clean working environment while adhering to company policies, quality policies, and industry standards&nbsp;</li></ul><ul><li>Detail oriented, organized, and able to demonstrate a high sense of urgency&nbsp;</li></ul>ADDITIONAL REQUIREMENTS&nbsp;<ul><li>Must be able to lift up to 25lbs unassisted &nbsp;</li></ul><ul><li> Ability to remain focused while working in hazardous environments, while wearing appropriate PPE&nbsp;&nbsp;</li></ul><ul><li>Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$25—$35 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Biow at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Senior Equipment Maintenance Technician

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $290 billion of real estate in 247 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 857,400 units/beds globally, and has a robust institutional investment management platform comprised of more than $76 billion of assets under management, including over $34 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTIONProperty Type: Lease UpUnit Count: 218Schedule: TBD *subject to change depending on business needsRequirements: At least two years of property maintenance experience Essential Responsibilities: 1. Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements.&nbsp;2. Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work.&nbsp;3. Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs.&nbsp;4. Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked.&nbsp;5. Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed.&nbsp;6. Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment.&nbsp; &nbsp;Other Responsibilities:&nbsp; 1. Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately.&nbsp;2. May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required.&nbsp;Service Technician&nbsp;3. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management.&nbsp;Required Licenses or Certifications: •&nbsp;&nbsp; &nbsp;Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have valid driver’s license to operate a golf cart on property. #LI-DD1The hourly range for this position is $17.50 to $25.00 (Long Beach, CA)Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.

Service Technician - Aster

Join the Clean Energy RevolutionBecome a&nbsp;Field Planning Technician Trainee&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll support the regulatory requirements of Southern California Edison (SCE’s) electrical distribution system by responding to our customers and communities, you will be behind every light switch, making contributions, big and small, to help Southern California thrive. All&nbsp;Field Planning Technician Trainee&nbsp;training is paid. Your virtual/physical training will take place in our Chino, CA offices (location subject to change) and on-the-job training will be at your designated work location. Once you complete your training, you will be a bona fide Field Planning Technician. As a&nbsp;Field Planning Technician Trainee, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?&nbsp;&nbsp;<h4>Responsibilities</h4><ul><li>Assists with coordinating activities between customers, drafting technicians and engineers and other utilities, local government and construction crews </li><li>Aids in identifying and keeping a record of existing materials, taking photos, pole loading, meter spotting, and reviewing and approving meter panel locations to ensure compliance of electrical designs</li><li>Collaborates with planners, designers and field personnel to perform routine field visits</li><li>Follows established corrective action process for quality findings</li><li>Collaborates with appropriate stakeholders to inform, initiate, and ensure correction when discrepancies are found</li><li>Performs diagnostic testing, install program measures and perform minor repairs as appropriate by program</li><li>Manages supplied inventory materials and company issued equipment</li><li>Communicates all existing and potential customer service issues to immediate supervisor in real time</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Education, training or experience in a utility, construction or electrical trade.</li><li>Posses a valid Class C Driver's License.</li></ul>Preferred Qualifications<ul><li>Familiarity with electrical utility industry practices and regulatory standards.</li><li>Experience with overhead or underground electrical distribution systems.</li><li>Proficient with computer software applications, such as SPIDAcalc, SpidaMin, Design Manager, Circuit Mapping, SCEGeoView cGIS AutoCAD, SAP, SharePoint, Microsoft Word, and Excel.</li><li>Successful completion of Electrical Utility Planner Certification Program (from California State Polytechnic University, Pomona), AutoCAD, or similar programs.</li><li>Strong oral and written communication skills to connect with clients/customers.</li><li>Customer service experience building relationships, identifying needs, and resolving issues.</li></ul>Additional Information<ul><li>This position’s work mode is hybrid. The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days. Unless otherwise noted, employees are required to reside in the state of California. Further details of this work mode will be discussed at the interview stage.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li><li>Position will require up to 30% traveling and being out in the field throughout the SCE service territory.</li><li>You will be requested to do an OnDemand digital interview as part of the hiring process. Click here to view more about digital interviewing and get tips to help you prepare.</li><li>Relocation does not apply to this position.</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.</li></ul>Testing<ul><li>This position requires testing and applicants who are identified to continue through the selection process will be invited to test via email. Reference our Information Guide to following tests: (EEI TECH (Test #5107)). Candidates who have previously passed this assessment(s), in some cases, may not need to retest again for this position.</li><li>Testing will begin on 10/21/24. Monitor your email account daily to ensure important communications regarding your application status or invitation to test are not missed. Invitations to test will be sent to the email address used during your application.</li></ul>About SCEThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Field Planning Technician Trainee - Long Beach

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $290 billion of real estate in 247 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 857,400 units/beds globally, and has a robust institutional investment management platform comprised of more than $76 billion of assets under management, including over $34 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTIONProperty Type: StabilizedUnit Count: 212Requirements: 2 + years for Maintenance Tech experience &nbsp;Essential Responsibilities: 1. Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements.&nbsp;2. Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work.&nbsp;3. Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs.&nbsp;4. Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked.&nbsp;5. Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed.&nbsp;6. Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment.&nbsp; &nbsp;Other Responsibilities:&nbsp; 1. Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately.&nbsp;2. May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required.&nbsp;Service Technician&nbsp;3. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management.&nbsp;Required Licenses or Certifications: •&nbsp;&nbsp; &nbsp;Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have valid driver’s license to operate a golf cart on property.#LI-KW1The hourly range for this position is $27.00 to $28.0 (Long Beach, CA)Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.

Sr Service Technician - Avana on the Pine

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician TTS

ABOUT GREYSTARGreystar is a leading, fully integrated global real estate company offering expertise in property management, investment management, development, and construction services in institutional-quality rental housing, logistics, and life sciences sectors. Headquartered in Charleston, South Carolina, Greystar manages and operates more than $290 billion of real estate in 247 markets globally with offices throughout North America, Europe, South America, and the Asia-Pacific region. Greystar is the largest operator of apartments in the United States, manages more than 857,400 units/beds globally, and has a robust institutional investment management platform comprised of more than $76 billion of assets under management, including over $34 billion of development assets. Greystar was founded by Bob Faith in 1993 to become a provider of world-class service in the rental residential real estate business. To learn more, visit <a href="http://www.greystar.com" target="_blank">www.greystar.com</a>. JOB DESCRIPTION SUMMARYThis position performs technical and mechanical work that ensures the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality.JOB DESCRIPTIONProperty Type: Lease - UpUnit Count: 1100Schedule: Sunday - Thursday, 9am - 6pm *Subject to change dependent on business needsJob Requirements: 1 year of property maintenance experience, lease up experience preferred. Essential Responsibilities: 1. Completes assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements.&nbsp;2. Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work.&nbsp;3. Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property’s maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs.&nbsp;4. Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked.&nbsp;5. Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed.&nbsp;6. Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment.&nbsp; &nbsp;Other Responsibilities:&nbsp; 1. Complies with Greystar’s safety and risk-management policies by attending and participating in the property’s routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately.&nbsp;2. May periodically inspect work performed by contractors, vendors and other service providers to verify the work, materials and services meet quality standards, scope and specifications as required.&nbsp;Service Technician&nbsp;3. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management.&nbsp;Required Licenses or Certifications: •&nbsp;&nbsp; &nbsp;Incumbents must have EPA certifications Type 1 and II or Universal for refrigerant recycling. (Applies to Certified Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have all certifications as required by State and Local jurisdictions. (Applies to all Service Technicians.) •&nbsp;&nbsp; &nbsp;Incumbents must have valid driver’s license to operate a golf cart on property.#LI-DZ1The hourly range for this position is&nbsp;$17.50 - $26.25 (Santa Ana, CA)Additional Compensation:<ul><li>Corporate Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in&nbsp;an annual bonus program based on&nbsp;individual and company performance.</li><li>Onsite Property Positions:&nbsp;In&nbsp;addition to the base salary, this role may be eligible to participate&nbsp;in weekly, monthly, and/or quarterly bonus programs.</li></ul>Robust Benefits Offered*:<ul><li>Competitive Medical, Dental, Vision, and Disability &amp; Life&nbsp;insurance benefits. Low (free basic) employee Medical costs for employee-only coverage; costs discounted after 3 and 5 years of service.</li><li>Generous Paid Time off. All new hires start with 15 days of vacation, 4 personal days, 10 sick days, and 10 paid holidays. Plus your birthday off after 1 year of service! Additional vacation accrued with tenure.</li><li>For onsite team members, onsite housing discount at Greystar-managed communities are available subject to discount and unit availability.</li><li>6-Week Paid Sabbatical after 10 years of service (and every 5 years thereafter).</li><li>401(k) with Company Match up to 6% of pay after 6 months of service.</li><li>Paid Parental Leave and lifetime Fertility Benefit reimbursement up to $10,000 (includes adoption or surrogacy).</li><li>Employee Assistance Program.</li><li>Critical Illness, Accident, Hospital&nbsp;Indemnity, Pet&nbsp;Insurance and Legal Plans.</li><li>Charitable giving program and benefits.</li></ul>*Benefits offered for full-time employees. For Union and Prevailing Wage roles, compensation and benefits may vary from the listed&nbsp;information above due to Collective Bargaining Agreements and/or local governing authority.Greystar will consider for employment qualified applicants with arrest and conviction records.

Maintenance Technician - The Row at Red Hill

This is an opportunity to grow your career at a large, international aerospace company. The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), a 401(k) matching program, and paid holidays and vacation. Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Key Responsibilities: <ul><li>Fabricate prototype parts to the print within schedule using EDM, CNC lathes and mills</li><li>Program EDM, CNC lathes and Mills (CAM programming)</li><li>Support R&amp;D engineers and technicians to manufacture complex parts</li><li>Inspect work piece and check dimensions</li><li>Use personal computers and CAM and solidworks softwares</li><li>Use EDM wire and sinker machines</li><li>Comply with all the EHS rules and regulations and supervisory instructions.</li><li>Run manual lathe and mill machines</li><li>Perform preventative maintenance</li><li>Perform shop floor house keeping</li><li>Prepare daily production report</li><li>Responsible for producing and maintaining high level quality parts per prints</li></ul> Physical Requirements: <ul><li>Must be able to lift up to 30 lbs</li></ul> Basic Requirements: <ul><li>Minimum of 2 year’s experience working at machine shop</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant’s ability to lawfully obtain access to such items</li></ul> Preferred Qualifications <ul><li>Minimum 5 year’s experience working at a machine shop in aerospace manufacturing</li><li>Knowledge of manufacturing processes, blue-print reading</li><li>Experience with EDM, CNC and manual Lathes and Mill, CAD and programing softwares</li><li>Experience in high precision multi axis machining, Inspection</li></ul> About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

26 Technician Jobs in Santa Ana, CA, USA