field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Join the Clean Energy RevolutionBecome a&nbsp;Heavy Transportation Driver&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll serve as a Heavy Transportation Driver within the Supply Logistics organization.&nbsp;As a Heavy Transportation Driver, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?A day in the life - Get ready to think big, work smart and shine brightly!<ul><li>Drives any size or type of heavy truck and tows any size or type of trailer with an unlimited combination of axles and/or maximum weight and/or height, width or length allowed by state or local regulations, to transport material, tools, equipment, and supplies.&nbsp; Loads and unloads all types of freight and construction equipment from truck and/or trailer.</li><li>Operates or directs others in operation of truck and trailer auxiliaries, and all types of material handling equipment to load and unload freight.</li><li>Performs duties of Construction Equipment Operator IV, as qualified, or helper when not hauling freight.</li><li>Loads truck and trailer to assure proper distribution of load. Secures loads to prevent shifting and covers load as required to prevent damage.</li><li>Performs vehicle inspections and makes minor or emergency repairs and adjustments.</li><li>Attaches coupling, safety chains, lights, brake connections and warning flags.</li><li>Signs paper for receipt and delivery of freight.</li><li>Prepares vehicle operator reports.</li></ul>Qualifications - ExternalThe essentials<ul><li>Experience as a Heavy Transportation Driver.</li><li>Valid California Class A Driver's License with a clean abstract and the ability to drive interstate.</li></ul>The preferred<ul><li>Five years of flatbed and/or trailer experience.</li><li>Class A license that inclues these endorsements: Hazmats, Tankers, Doubles and Triples.&nbsp;</li><li>Knowledge of: Operation and maintenance of heavy truck and trailer equipment; Company policies and practices and Accident Prevention Rules for vehicle operation; traffic laws, permits and routes for trucking activities; trucker rigging methods and hand signals for material excavation and earth moving construction equipment for loading or unloading or work as qualified as Construction Equipment Operator IV; First Aid Procedures; and Safe Work Practices.</li><li>Ability to: Skillfully operate and maneuver truck and trailer equipment under a variety of traffic and terrain conditions; comply with traffic laws; follow authorized truck routes; make minor repairs and adjustments to trucking equipment; understand and follow oral and written instructions; perform heavy physical work; write legibly; give and interpret signals for operating material handling equipment; operate light construction equipment for on or off loading as required; and maintain a Class A Driver's License.</li></ul>You should know<ul><li>Visit our&nbsp;Candidate Resource page&nbsp;to get meaningful information related to benefits, perks, resources, testing information, and hiring process, and more!</li><li>This position will involve overnight stays depending on where the work is assigned.</li><li>Work Hours: 5 am-1:30pm M-F.</li><li>This position may require additional testing as part of the selection process.</li></ul>Testing<ul><li>This position requires testing and applicants who are identified to continue through the selection process will be invited to test via email. Reference our Information Guides, for the following test(s): Edison EEI BCAB test 5206. Candidates who have previously passed these assessment(s), in some cases, may not need to retest again for this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727

Southern California Edison

Heavy Transportation Driver

Join the Clean Energy Revolution Become&nbsp;a&nbsp;Telecommunications Advisor - Grid Information Technology&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job,&nbsp;you’ll perform telecommunications activities with forward thinking automation approach to improve engineering processes and develop workflows on critical and key initiatives and projects related to substations and data center networks, fiber optics transport system, and microwave systems. You will provide expert guidance on all matters related to SCE Networks and involve collaborating with multi-functional teams to ensure that automation efforts align with overall IT Grid Services business goals. This requires strong communication and collaboration skills as you will work closely with different team members to understand their requirements and tailor the automation approach to meet their needs. Key Focus of Role<ul><li>Strategic Planning:&nbsp;Develop and implement telecommunications policies and procedures to help achieve IT Digital Grid Services organizational business goals and drive innovation to give a competitive edge.</li><li>Collaboration:&nbsp;Partner with multi-functional teams to understand business needs and to drive data standards, data quality, and ensure automation strategies are effective and efficient.</li><li>Automation:&nbsp;Use data analytics and automation technology to continuously enhance automation strategies to keep automation up-to-date and deliver meaningful benefits to the IT Digital Grid Services organization.</li><li>Data Standards:&nbsp;Actively implement standards, measure performance of engineering metrics data standards, and report progress to various leadership forums.</li><li>Data Engineering:&nbsp;Develop and maintain technical data standards including data engineering and data science to ensure alignment with emerging technologies and industry trends (e.g., data fabric, data mesh). Additionally, work with telecommunications and network engineers, data scientists, and IT Grid Services Automation team to ensure consistent data standards.</li><li>Workplace Learning: Facilitate training and support to engineering teams on automation practices and processes.</li><li>Financial Tracking: Monitor the financial status of Grid Projects engineering portfolios using effective tracking and reporting tools.</li><li>Workload Optimization: Optimize the allocation of engineering workload by leveraging automation and other tools to improve efficiency and productivity.</li><li>Technology Initiatives: Lead Digital Grid Services technology related initiatives from concept to implementation.</li><li>Process Improvement: Evaluate current engineering processes and recommend improvements or upgrades as needed. This includes CAISO Unit Cost Guidelines, Queue Cluster and Method of Service studies.</li><li>Vendor Management: Manage vendor relationships and negotiating contracts and service agreements.</li><li>Additional Duties: Perform other responsibilities and duties as assigned.</li></ul>As a&nbsp;Telecommunications Advisor - Grid Information Technology, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?<h4>Responsibilities</h4><ul><li>Troubleshoots the most business-critical and time sensitive production impacting incidents</li><li>Manages and supports application and infrastructure resources in new project implementations</li><li>Drives the usage of and improvement to the IT Service desk ticketing system, including documenting knowledge-based articles</li><li>Coordinates and drives resolution for complex and multi-site user-impacting events</li><li>Assists the IT asset management program include laptops, desktops, peripherals, tablets/iPads, and software licenses</li><li>Actively participates and assists in developing processes such as configuration management, incident, problem and knowledge management, and change controls utilizing Information Technology Information Library (ITIL) and other common best practices</li><li>Serves as the initial point of contact on day-to-day operational, process, and performance items</li><li>Registers incidents and requests and effectively priorities work to resolve within the agreed service level of agreement; handles tickets assigned to service management team raised by all channels (call, email, IM, or self-service portal) and fulfils day-to-day technology operation demands from stakeholders</li><li>Performs onsite hardware and software fixes and workarounds where necessary across multiple sites</li><li>Prepares detailed documentation and guidance to all users in the effective use of systems and products where required</li><li>A material job duty of all positions within the Company is ensuring the protection of all its physical, financial and cybersecurity assets, and properly accessing and managing private customer data, proprietary information, confidential medical records, and other types of highly sensitive information and data with the highest standards of conduct and integrity.</li></ul><h4>Minimum Qualifications</h4><ul><li>Seven or more years of experience in IT Service Delivery. </li></ul>Preferred Qualifications<ul><li>Bachelor’s Degree or higher in Electrical, Computer Engineering, Telecommunications, or relevant technical field.</li><li>Five or more years of experience in Engineering or Data Analytics.</li><li>Five or more years of experience in Telecommunications.&nbsp;</li><li>Experience in Backend Automation Technologies and Artificial Intelligence (such as APIs, Python Language, or Bash/PowerShell scripting language)</li><li>Experience with process improvement workflows such as ITIL, Kaizen or Lean and/or tools such as Ansible, Docker and Kubernetes.</li><li>Experience with Machine Learning Technologies in Data Modeling and tools such as TensorFlow, PyTorch or SparkML with any type of neural architecture.</li><li>Experience with optical theory and transport technologies and the operation of optical transport MPLS, DWDM, SONET and Microwave systems.</li><li>Experience with Telecommunications Engineering within the Electric Utility Industry.</li><li>Experience with electric grid operations (e.g., experience with SCADA or Protective Relaying).</li><li>Experience mentoring, developing, training, and providing functional direction to technical staff.</li><li>Experience integrating work across relevant areas, developing the business and services to enhance customer satisfaction and productivity, managing risks and safety appropriately.</li><li>Strong ethics, leadership, interpersonal skills, communication, and the ability to effectively manage stress and engage in continuous learning.</li></ul>Additional Information&nbsp;<ul><li>This position’s work mode is&nbsp;hybrid.&nbsp;The employee will report to an SCE facility for a set number of days with the option to work remotely on the remaining days.  Unless otherwise noted, employees are required to work and&nbsp;reside in the state of California.  Further details of this work mode will be discussed at the interview stage.&nbsp;The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li></ul><ul><li>The primary work location for this position is&nbsp;Rosemead, CA.&nbsp; However, the successful candidate may also be asked to work for an extended amount of time at Pomona, CA or other SCE work locations.&nbsp;</li><li>Position will require up to 10%&nbsp;traveling and being out in the field throughout the&nbsp;SCE service territory.</li><li>This position has been identified as a NERC/CIP impacted position - Prior to being hired, the successful candidate must pass a Personnel Risk Assessment (PRA) or Background Investigation.&nbsp; Once hired, the candidate must complete specified training prior to gaining un-escorted access to assigned work location and performing necessary job duties.</li><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.</li><li>Relocation does not apply to this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Telecommunications Advisor - Grid Information Technology

<h4>How you will change lives</h4>As a Patient Care Technician (PCT) at US Renal Care, you will be an integral part of a cross-functional team providing care and delegated activities of treatment to patients. The PCT will work under the supervision of a Registered Nurse (RN) or Charge Nurse (CN) for patients with renal failure.<h4>What you'll be doing</h4>Patient care. You will work directly with patients to provide safe, comfortable, and high-quality dialysis treatment. Responsibilities include gathering patient stats before and after treatment, initiating treatment, monitoring patients during treatment, terminating treatment, and collecting patient blood samples per physician orders.Technician Duties. You will ensure quality comes first by preparing machines for hemodialysis treatments, cleaning and disinfecting machines after treatment, and conducting machine safety checks and logging results for quality control, ensuring all protocols and regulations are followed.Safety and Quality. You will use appropriate safety measures, including personal protective equipment. Working under the supervision of a Charge Nurse, you will adhere to all company policies, procedures, and state/federal laws and regulations. You will participate in all required staff meetings and continuing education offerings.PATIENT CARE TECHNICIAN STATE SPECIFIC BOARD OF NURSING REQUIREMENTS California<ul><li>Must possess current Certified Hemodialysis Technician (CHT) certificate from California Department of Public Health (CDPH) at time of hire OR</li><li>Hired at USRC location recognized by state of California as an approved dialysis technician training program and obtain California state certification (CHT) within six (6) weeks of successful completion of training program. </li></ul>Maryland<ul><li>Must possess current Certified Nursing Assistants -- Dialysis Technicians (CNA-DT) certificate from Maryland Board of Nursing OR</li><li>Hired at USRC location recognized by state of Maryland as an approved dialysis technician training program and obtain Maryland CNA-DT certificate within three (3) months from date of hire OR</li><li>Out-of-state applicant must have active BONENT certification and provide proof of initial application for CNA-DT certification.</li></ul>New Mexico<ul><li>Must have New Mexico dialysis technician certificate at time of hire OR</li><li>Hired at USRC location recognized by state of New Mexico as an approved dialysis technician training program and obtain New Mexico state certification within six (6) months of successful completion of training program OR</li><li>New Mexico certification of hemodialysis technician is required for out of state applicant with active state or national hemodialysis certification; must obtain New Mexico state certification prior to working as a Certified Hemodialysis Technician. </li><li>After January 1st, 2024, all initial applications for the certified hemodialysis technician will require a national hemodialysis technician certificate.</li><li>The applicant must submit proof of a valid national hemodialysis technician certificate from a recognized organization.</li><li>Hemodialysis technician students must have a current basic life support credential prior to and while the student has contact with patients</li></ul>OHIO<ul><li>Must have Ohio dialysis technician intern certificate at time of hire OR</li><li>Hired at USRC location recognized by state of Ohio as an approved dialysis technician training program and submit application for Ohio dialysis technician intern certificate to board no later than four (4) weeks prior to completion of the approved training program.</li><li>Must obtain Ohio Board of Nursing Certificate (OCDT) not less than twelve (12) months and not later than eighteen (18) months of enrolling in the USRC OCDT program.</li></ul>OREGON<ul><li>Must possess current Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division at time of hire OR</li><li>Must obtain Oregon dialysis technician provisional certificate within three (3) weeks of successful completion of training program and obtain Certified Hemodialysis Technician (CHDT) certificate from Oregon Public Health Division within eighteen (18) months. An Oregon Provisional Certification is valid for six months and can be renewed for one additional six month period.</li></ul>&nbsp;

U.S. Renal Care

Dialysis Patient Care Technician MWF

Salary Range:&nbsp;&nbsp;$55,245.00&nbsp;(Min.) -&nbsp;$69,045.00&nbsp;(Mid.) -&nbsp;$82,867.00&nbsp;(Max.)Established in 1997, L.A. Care Health Plan is an independent public agency created by the state of California to provide health coverage to low-income Los Angeles County residents. We are the nation’s largest publicly operated health plan. Serving more than 2 million members, we make sure our members get the right care at the right place at the right time. Mission: L.A. Care’s mission is to provide access to quality health care for Los Angeles County's vulnerable and low-income communities and residents and to support the safety net required to achieve that purpose. <h4>Job Summary</h4>The Help Desk Technician II provides workstation phone, off site and onsite support for users, vendors and/or clients, resolving computer issues and help desk-related requests. This position plans, analyzes, configures, and installs new personal computer systems, determining user specifications for hardware and software upgrades; maintains and repairs existing computers; and deals with most issues that are simple or routine, escalating more complex or involved issues to Level II staff. This position composes documentation and communication regarding help desk/telephone support operations, and focuses on customer relations, achieving user comfort level on computer applications and equipment. This position may be required to travel on an as needed basis in order to fulfill user support responsibilities.<h4>Duties</h4>Help Desk Coordination: Track all help desk issues and ensure that all are assigned to a staff member, are completed, and that users are kept informed of the status of their requests. (30%)User Support: Provide 1st-tier user support for all simple or routine user issues. Help users resolve system problems, utilize standard software, and maintain standard hardware. The Help Desk Technician may be required to travel on an as needed basis in order to fulfill user support responsibilities. (30%)Account Creation: Create standard accounts for new users for workstation login or email. Assign users to established groups and assign standard file permissions on appropriate servers. (15%)Maintain Supplies: Responsible for maintaining computer-related supplies (toner cartridges, floppy disks, backup tapes, etc.). Keep track of use, research prices, submit expenditure requests when needed, and ensure that consumables don't run out. Ensure that new hardware is accurately entered into the FAS accounting system. Workstation Roll out/Patching: Provide manpower for workstation rollouts and applying patches to workstations. (15%)Perform other duties as assigned. (10%).<h4>Duties Continued</h4><h4>Education Required</h4>High School Diploma/or High School Equivalency Certificate<h4>Education Preferred</h4>Associate's Degree<h4>Experience</h4>Required:At least 2 years of experience in configuring &amp; administering networked computer systems in a Windows environment.Strong experience with TCP/IP, Microsoft Outlook Email, Laptops and PDAs such as blackberry.Experience in providing support to telecommute &amp; mobile laptop users required. <h4>Skills</h4>Required:Familiar in configuring remote LAN access for VPN. Excellent team work ethic.Excellent communication and customer service skills. Working knowledge of the Microsoft Office Suite, Windows XP/7 and Active Directory.Preferred: Strong PC and desktop application knowledge.Strong computer troubleshooting and problem solving skills.<h4>Licenses/Certifications Required</h4><h4>Licenses/Certifications Preferred</h4>Computing Technology Industry Association (CompTIA) A+ CertificationHelp Desk Institute (HDI) Certification<h4>Required Training</h4><h4>Physical Requirements</h4>Moderate<h4>Additional Information</h4>Salary Range Disclaimer: The expected pay range is based on many factors such as geography, experience, education, and the market.&nbsp; The range is subject to change.L.A. Care offers&nbsp;a wide range of benefits including<ul><li>Medical, Dental and Vision</li><li>Wellness Program</li><li>Paid Sick Leave</li></ul> Nearest Major Market: Los Angeles

L.A. Care Health Plan

Help Desk Technician II ( 100% On-site, Temporary- 1 year))

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!MANUFACTURINGRocket Lab’s Manufacturing team are the builders and the doers who work with our advanced machinery across our global manufacturing sites to get our satellites, satellite components, and rockets out the door. They bring the designs of our engineers to life by using advanced manufacturing techniques like 3D printing to create our hardware and are responsible for delivering our projects and missions on time and on budget to our customers.HARNESS MANUFACTURING TECHNICIAN II/SENIORBased onsite at Rocket Lab's global headquarters in Long Beach, California, the Harness Manufacturing Technician II/Senior is responsible for building and testing components and electrical assemblies of the Rutherford rocket engine - an electric propellant pump system. Harness Manufacturing Technicians are responsible for a broad range of responsibilities including soldering, wire harnessing, PCB assembly, functional testing, operating thermal chambers, creative ideas, and offer continuous improvement recommendations.WHAT YOU’LL GET TO DO:<ul><li>Follow work instructions and offer recommendations for continuous improvement.&nbsp;</li><li>Speak openly and elevate concerns / recommendations to Leading Hand.</li><li>Think creatively, and question status quo.</li><li>Actively contribute to local 5S work center.</li><li>Identify and highlight abnormalities.</li><li>Complete assigned special projects and scheduled jobs. [JE1] [BM2] [JE3]</li><li>Manage multiple tasks and pivot onto exciting high priority tasks.</li></ul>(This position can be hired as a Harness Manufacturing Technician II or Senior Harness Manufacturing Technician Level)YOU’LL BRING THESE QUALIFICATIONS AS A HARNESS MANUFACTURING TECHNICIAN II:<ul><li>5+ years of experience with electrical harness assembly and testing to an Aerospace standard or equivalent high-reliability field.</li><li>High School diploma, GED, or 9+ years of applicable electrical and/or testing experience in lieu of diploma&nbsp;</li><li>Experience assembling per manufacturing instructions and drawings.</li></ul>YOU’LL BRING THESE QUALIFICATIONS AS A SENIOR HARNESS MANUFACTURING TECHNICIAN:<ul><li>8+ years of experience with electrical harness assembly and testing to an Aerospace standard or equivalent high-reliability field.</li><li>High School diploma, GED or 12+ years of applicable electrical and/or testing experience in lieu of diploma&nbsp;</li><li>Experience assembling per manufacturing instructions and drawings.</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:<ul><li>Inspect PCB and wiring assemblies meet customer workmanship standards.</li><li>Use of specialist tools and equipment; wire strippers, HiPot Testers, DMC Hand Crimpers, Banding Tools, Automatic Wire-Stripping Machine, DMC Pneumatic Crimpers, Back shell Torqueing Tools, Pin Retention Testers,</li><li>IPC-WHMA-A-620 certified.</li></ul>ADDITIONAL REQUIREMENTS&nbsp;<ul><li>Must be able to walk and stand for long periods of time&nbsp;</li><li>Must be comfortable working in a production environment with extensive use of hazardous chemicals such as acids, alkalis, and solvents&nbsp;</li><li>Must be able to lift up to 25lbs. unassisted.&nbsp;</li><li>Must be able to wear appropriate PPE for lab and electro-chemical manufacturing environment&nbsp;</li><li>Must be comfortable with climbing up and down ladders, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, carrying, crawling, and maneuvering in tight spaces&nbsp;</li><li>Must be willing to work extended hours and/or weekends as needed&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$25—$40 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Harness Manufacturing Technician II/Senior

USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization.&nbsp;The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s).ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.&nbsp; Other duties and tasks may be assigned.&nbsp;<ul><li>Demonstrate effective use of supplies and staff labor hours.</li><li>Assist with purchasing as needed: place orders, perform weekly and month end inventory counts.</li><li>Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory.</li><li>Perform duties as assigned to meet the patient care or operational needs of the clinic.</li><li>Troubleshoot, repair and maintain equipment as recommended by the manufacturer.</li><li>Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol.</li><li>Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing.</li><li>Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters.</li><li>Collect samples of RO water and dialysate for microbiology testing according to protocol.</li><li>Collect water samples for AAMI analysis testing according to protocol.</li><li>Disinfection of central bicarbonate system and mixing tank according to protocol.</li><li>Disinfection of RO, distribution system, and hemodialysis machines according to protocol.</li><li>Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations.</li><li>Perform electrical safety on dialysis machines and related equipment.</li><li>Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary.</li><li>Maintain established preventative maintenance programs and required support documentation.</li><li>Maintain accurate maintenance records for the facility's equipment.</li><li>Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems.</li><li>Address physical environment issues which could impact patient and staff safety.</li><li>Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol.</li><li>Assist in receiving, storing and stocking of supplies.</li><li>Be familiar with all emergency equipment and emergency operational procedures.</li><li>Use appropriate safety measures including personal protective equipment as necessary.</li><li>Be familiar with OSHA regulations.</li><li>Update Material Safety Data Sheets (MSDS) as required.</li><li>Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems.</li><li>Obtain quotes from reputable and approved contractors as needed to address physical environment issues.</li><li>Present technical summaries in QAPI meetings.</li><li>Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met.</li><li>Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization.</li><li>Respond effectively to inquiries or concerns.</li><li>Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure.</li><li>Complete initial and annual technical training on clinical staff as required.</li><li>Instruct staff in use and care of equipment and answer questions.</li><li>Participate in team concepts and promote a team effort.</li></ul>

Dialysis Biomedical Technician

About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at <a href="http://www.howmet.com/esg-report" target="_blank">www.howmet.com/esg-report</a>. Howmet Fastening Systems (HFS) is seeking a Maintenance Tech - Mechanic in our Torrance, CA location.&nbsp;HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California.&nbsp; We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Primary Purpose The primary function of this position is to maintain, repair, adjust, and modify the facilities tools and equipment, as well as the building and its grounds, according to a set schedule and in emergency and non-emergency situations. Major Activities <ul><li>Strictly adhere to safety regulations and plant policies.</li><li>Perform highly diversified duties to install and maintain production machines and the plant facility’s tools and equipment.</li><li>Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service.</li><li>Perform simple machinist duties and responsibilities.</li><li>Perform mechanic skills including but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines.</li><li>Read and interpret equipment manuals and work orders to perform required maintenance and service.</li><li>Diagnose problems, repair or replace parts, test and make adjustments.</li><li>Perform a variety of plumbing maintenance and carpentry functions.</li><li>Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.</li><li>Detect faulty operations, defective material and report those and any unusual situations to proper supervision.</li><li>Perform all other duties as assigned or needed.</li><li>At the end of the shift, secure all equipment and complete all necessary paperwork.</li></ul> Essential Knowledge &amp; Skills <ul><li>Mechanical aptitude and willingness to work on oily and noisy machinery.</li><li>Knowledge of or experience in working with Davenport Machines, Screw Machines, Drillers, Tappers, and other manufacturing equipment, as well as troubleshooting the above-mentioned machines.</li><li>Excellent communication skills.</li><li>Strong interpersonal relationship skills.</li><li>Physically able to stand, bend, reach, stretch, and lift 15-30 pounds repetitively.</li><li>Flexible, whatever it takes attitude.</li><li>Detail oriented and has the ability to follow both oral and written directions, ability to work unsupervised.</li></ul> Basic Qualifications <ul><li>High School Diploma or GED equivalent (Preferred)</li><li>Minimum 5&nbsp;years of experience as an Industrial Mechanic</li><li>Employees must be legally authorized to work in the United States.&nbsp; Verification of employment eligibility will be required at the time of hire.&nbsp; Visa sponsorship is not available for this position</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant’s ability to lawfully obtain access to such items</li></ul> Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $25.00-$38.00. About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a> Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Howmet Aerospace

Maintenance Tech, Mechanic

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRON &nbsp;Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!&nbsp;WELDER, PRECISION FINISHING TECHNICIAN – C SHIFT Based out of Rocket Lab Headquarters in Long Beach, California the Welder, Precision Finishing Technician will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines.&nbsp;&nbsp;WHAT YOU’LL GET TO DO:&nbsp;&nbsp;<ul><li>Follow procedures to set up and operate our welding systems.&nbsp;</li><li>Weld assemblies according to work orders, blueprints and verbal instructions.&nbsp;</li><li>Follow blueprints and to meet product specifications within tight tolerances.&nbsp;</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A WELDER, PRECISION FINISHING TECHNICIAN:<ul><li>5+ years of experience in welding with a focus on advanced techniques.&nbsp;</li><li>Experience in industries such as Aerospace, Automotive, Shipbuilding, or Construction.&nbsp;</li><li>Familiarity with industry standards and codes (e.g., ASME, ANSI, ISO).&nbsp;</li><li>Proficient in various welding techniques, including TIG, MIG, Stick, and Flux-Cored Arc Welding.&nbsp;</li><li>Ability to read and interpret blueprints, schematics, and welding symbols.&nbsp;</li><li>Experience with welding on different materials such as carbon steel, stainless steel, aluminum, and exotic alloys.&nbsp;</li><li>Experience welding on .011 - .250.&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Experience in metal fabrication and assembly.&nbsp;</li><li>Experience with Deburring and using pencil grinders. &nbsp;</li><li>Capable of supporting Grinding department.&nbsp;</li></ul>CERTIFICATIONS<ul><li>Certified welder.&nbsp;</li><li>Certifications in specialized welding processes (TIG / Brazing process).&nbsp;</li><li>Certification for specific materials (e.g., Stainless Steel, Aluminum, Titanium, and Inconel).&nbsp;</li></ul>ADDITIONAL REQUIREMENTS<ul><li>Willing to work C Shift (Friday – Sunday 5:30am - 3:30pm)&nbsp;</li><li>Ability to travel and communicate outside of work hours&nbsp;</li><li>Must be able to work extended hours and/or weekends as needed&nbsp;</li><li>Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.&nbsp;&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min </li><li>Must be able to lift up to 25lbs. Unassisted.&nbsp;</li><li>Must pass welder certification with in 30 days.&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$20—$40 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Welder, Precision Finishing Technician - C shift

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRON&nbsp;&nbsp;Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!&nbsp;WELDER, PRECISION FINISHING TECHNICIAN Based out of Rocket Lab Headquarters in Long Beach, California the Welder, Precision Finishing Technician will weld and fabricate various fluid systems and sub-assembly components for the Rutherford and Archimedes Rocket engines.&nbsp;&nbsp;WHAT YOU’LL GET TO DO:&nbsp;&nbsp;<ul><li>Follow procedures to set up and operate our welding systems.&nbsp;</li><li>Weld assemblies according to work orders, blueprints and verbal instructions.&nbsp;</li><li>Follow blueprints and to meet product specifications within tight tolerances.&nbsp;</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A WELDER, PRECISION FINISHING TECHNICIAN:<ul><li>5+ years of experience in welding with a focus on advanced techniques.&nbsp;</li><li>Experience in a manufacturing or industrial setting.&nbsp;</li><li>Proven track record of working on complex projects requiring precision welding.&nbsp;</li><li>Experience in industries such as Aerospace, Automotive, Shipbuilding, or Construction.&nbsp;</li><li>Familiarity with industry standards and codes (e.g., ASME, ANSI, ISO).&nbsp;</li><li>Proficient in various welding techniques, including TIG, MIG, Stick, and Flux-Cored Arc Welding.&nbsp;</li><li>Ability to read and interpret blueprints, schematics, and welding symbols.&nbsp;</li><li>Familiarity with welding equipment setup, maintenance, and troubleshooting.&nbsp;</li><li>Experience with welding on different materials such as carbon steel, stainless steel, aluminum, and exotic alloys.&nbsp;</li><li>Experience welding on .011 - .250.&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Experience in metal fabrication and assembly.&nbsp;</li><li>Experience with Deburring and using pencil grinders. &nbsp;</li><li>Capable of supporting Grinding department.&nbsp;</li></ul>CERTIFICATIONS<ul><li>Certified welder.&nbsp;</li><li>Certifications in specialized welding processes (TIG / Brazing process).&nbsp;</li><li>Certification for specific materials (e.g., Stainless Steel, Aluminum, Titanium, and Inconel).&nbsp;</li></ul>ADDITIONAL REQUIREMENTS<ul><li>Ability to travel and communicate outside of work hours&nbsp;</li><li>Must be able to work extended hours and/or weekends as needed&nbsp;</li><li>Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.&nbsp;&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min </li><li>Must be able to lift up to 25lbs. Unassisted.&nbsp;</li><li>Must pass welder certification with in 30 days.&nbsp;</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$20—$40 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Welder, Precision Finishing Technician

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!NEUTRON&nbsp;Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab’s proven execution history with the Electron program. If you’re interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity!&nbsp;PRECISION FINISHING TECHNICIAN II, DEBURR&nbsp;As a Precision Finishing Technician II, Deburr for Rocket Lab you will be deburring / finishing additive manufactured parts used to build Rutherford, an innovative electric turbo-pump rocket engine powering Rocket Labs Electron launch vehicle.&nbsp;YOU'LL BRING THESE QUALIFICATIONS:&nbsp;<ul><li>5+ years of experience in part finishing (machine, cast, forge, or print).&nbsp;</li><li>Attention to detail and time management skills.&nbsp;</li><li>High-level of manual dexterity skills and hand-eye coordination.&nbsp;</li><li>Able to maintain a clean, safe and efficient work area.&nbsp;</li></ul>THESE QUALIFICATIONS WOULD BE NICE TO HAVE:&nbsp;<ul><li>Experience with additive manufacturing or investment casting.&nbsp;</li><li>Experience with high strength steels and Inconel alloys.&nbsp;</li><li>Knowledgeable in part QA processes and dye penetrant testing.&nbsp;</li><li>Knowledgeable in TIG, Laser, and Electron beam welding.&nbsp;</li><li>Experience using microscopes and pencil grinders.&nbsp;</li></ul>ADDITIONAL REQUIREMENTS:&nbsp;&nbsp;&nbsp;<ul><li>Willing to work 2nd shift (Monday - Thursday 2:30pm-1:00am)&nbsp;</li><li>Ability to travel and communicate outside of work hours&nbsp;</li><li>Must be able to work extended hours and/or weekends as needed&nbsp;</li><li>Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.&nbsp;&nbsp;</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.&nbsp;</li><li>Must be able to walk or stand for extended periods – 8 hours min  &nbsp;</li><li>Must be able to lift up to 25lbs. Unassisted.</li></ul>Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.Base salary is just one component of our total rewards package at Rocket Lab.&nbsp; Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO &amp; a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, childcare concierge, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company’s discretion.Base Pay Range (CA Only)$25—$40 USDWHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

52 Technician Jobs in Los Angeles, CA, USA